MirrorMirror
/
mini-trackball
mirror of https://github.com/ploopyco/mini-trackball.git
2
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Ploopy Mini Trackball Kit Assembly (markdown)

ploopyco 2021-08-09 16:06:25 -04:00
parent 9cbd5425a4
commit a3f0814598
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Ploopy-Mini-Trackball-Kit-Assembly.md

@ -203,7 +203,7 @@ Take a look at the Scroll Wheel Holder Holder from above. It should be flush wit
## Step 21: Prepare the Buttons
<INSERT image of buttons, mostly assembled body WITHOUT the PCB scroll wheel holder.>
INSERT image of buttons, mostly assembled body WITHOUT the PCB scroll wheel holder.
Prepare the following components:
@ -213,7 +213,7 @@ Prepare the following components:
## Step 22: Attach the Primary Buttons
<INSERT new picture of primary buttons here.>
INSERT new picture of primary buttons here.
- The right click button has to be bent a little to fit over the scroll wheel axle. Be patient and gentle.
- Don't forget to insert the screw slowly, to ensure that you don't strip the plastic holding the screw in place.
@ -221,7 +221,7 @@ Prepare the following components:
## Step 23: Attach the PCB Scroll Wheel Holder to the Base
<INSERT picture of primary buttons attached + PCB scroll wheel holder here.>
INSERT picture of primary buttons attached + PCB scroll wheel holder here.
- The PCB Scroll Wheel Holder is the piece of plastic sitting on top of the PCB. It shouldn't require too much force to put on.
- Once the PCB Scroll Wheel Holder is attached, the Scroll Wheel is fully assembled. Give it a few spins, and give it a few clicks, just to make sure that everything feels right.