From a3f0814598b4ebf6a8e70f562b6bbb63598103cc Mon Sep 17 00:00:00 2001 From: ploopyco <54917504+ploopyco@users.noreply.github.com> Date: Mon, 9 Aug 2021 16:06:25 -0400 Subject: [PATCH] Updated Ploopy Mini Trackball Kit Assembly (markdown) --- Ploopy-Mini-Trackball-Kit-Assembly.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Ploopy-Mini-Trackball-Kit-Assembly.md b/Ploopy-Mini-Trackball-Kit-Assembly.md index 1f0f5d8..fad740f 100644 --- a/Ploopy-Mini-Trackball-Kit-Assembly.md +++ b/Ploopy-Mini-Trackball-Kit-Assembly.md @@ -203,7 +203,7 @@ Take a look at the Scroll Wheel Holder Holder from above. It should be flush wit ## Step 21: Prepare the Buttons - +INSERT image of buttons, mostly assembled body WITHOUT the PCB scroll wheel holder. Prepare the following components: @@ -213,7 +213,7 @@ Prepare the following components: ## Step 22: Attach the Primary Buttons - +INSERT new picture of primary buttons here. - The right click button has to be bent a little to fit over the scroll wheel axle. Be patient and gentle. - Don't forget to insert the screw slowly, to ensure that you don't strip the plastic holding the screw in place. @@ -221,7 +221,7 @@ Prepare the following components: ## Step 23: Attach the PCB Scroll Wheel Holder to the Base - +INSERT picture of primary buttons attached + PCB scroll wheel holder here. - The PCB Scroll Wheel Holder is the piece of plastic sitting on top of the PCB. It shouldn't require too much force to put on. - Once the PCB Scroll Wheel Holder is attached, the Scroll Wheel is fully assembled. Give it a few spins, and give it a few clicks, just to make sure that everything feels right.