MirrorMirror
/
mini-trackball
mirror of https://github.com/ploopyco/mini-trackball.git
2
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Ploopy Mini Trackball Kit Assembly (markdown)

ploopyco 2021-08-09 16:02:46 -04:00
parent 1af916eb9e
commit 38c3d5e076
1 changed files with 11 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
Ploopy-Mini-Trackball-Kit-Assembly.md

@ -201,14 +201,7 @@ Silicone is quite strong and doesn't rip easily.
Take a look at the Scroll Wheel Holder Holder from above. It should be flush with the PCB, with no visible gap.
## Step 21: Attach the PCB Scroll Wheel Holder to the Base
![pcb scroll wheel holder](https://lh3.googleusercontent.com/pw/ACtC-3cEAask2x6ErC5qUc0oB4a1gmfBzUwDNnFfrRnGgznI0rrOwa1N5oz_hYynYk_rRZZeicUTm-o9aE0VPgGXeWLtYIZw4nHyei593caNRX45Uibi7h9MrG_uSE_b6oBh2sxFAYqDyIbbAN7VMQW8xrDW=w1292-h969-no?authuser=0)
- The PCB Scroll Wheel Holder is the piece of plastic sitting on top of the PCB. It shouldn't require too much force to put on.
- Once the PCB Scroll Wheel Holder is attached, the Scroll Wheel is fully assembled. Give it a few spins, and give it a few clicks, just to make sure that everything feels right.
## Step 22: Prepare the Buttons
## Step 21: Prepare the Buttons
![base with buttons](https://lh3.googleusercontent.com/pw/ACtC-3cCRmP1wkdNh0uTAZQvgf1647nfaIRfc4LU1IH7oGC1b4lxAHCjKOPyC9n-Lai3ydSUYIB4aNuKaEj_vwE8FN0PGA7Ggo9chiQbQk9liWZ3gR96wTHSgjII8I5ATImmo1RJtOIzSYAlvCPE686W8grf=w1292-h969-no?authuser=0)
@ -218,13 +211,21 @@ Prepare the following components:
- Secondary Buttons
- 2x M3x8mm flat head screws
## Step 23: Attach the Primary Buttons
## Step 22: Attach the Primary Buttons
![primary buttons being screwed in](https://lh3.googleusercontent.com/pw/ACtC-3cs2C5MqTEXij6SLDuYxrYp_WZbGfRFXBvfPPTkAPFzo2yNFDQsuggFwPp2n3pGwPEdEFA_OO9fNdugoJF06hOsOjmqQ-6XKpO-1BP_vfPY1oCYt2ErJ1_HTknCy4JbZNMP-3SuNPCvPBDwWXwvJNPP=w1292-h969-no?authuser=0)
<INSERT new picture of primary buttons here.>
- The right click button has to be bent a little to fit over the scroll wheel axle. Be patient and gentle.
- Don't forget to insert the screw slowly, to ensure that you don't strip the plastic holding the screw in place.
- Make sure the buttons are oriented correctly. The bottom of the buttons should be parallel to the base.
## Step 23: Attach the PCB Scroll Wheel Holder to the Base
<INSERT picture of primary buttons attached + PCB scroll wheel holder here.>
- The PCB Scroll Wheel Holder is the piece of plastic sitting on top of the PCB. It shouldn't require too much force to put on.
- Once the PCB Scroll Wheel Holder is attached, the Scroll Wheel is fully assembled. Give it a few spins, and give it a few clicks, just to make sure that everything feels right.
## Step 24: Attach the Secondary Buttons
![secondary buttons screwed in](https://lh3.googleusercontent.com/pw/ACtC-3fo3SdCOHVNFVEjXXz0Q2To10e7p6CNbcCzTuBjbTEFTuQPqpm9eDhPYYwUnWSGBIrJ8BLoI1F04F74tT1KxmyIA7LHasAfSZOD4Vyumg9UxN7nbtuWJc_OUArmkt8EFtcHtkOHlM8DEEDFwMVarxwQ=w1292-h969-no?authuser=0)