From 38c3d5e076aa0db349d7ebd476a1c65ec1c56649 Mon Sep 17 00:00:00 2001 From: ploopyco <54917504+ploopyco@users.noreply.github.com> Date: Mon, 9 Aug 2021 16:02:46 -0400 Subject: [PATCH] Updated Ploopy Mini Trackball Kit Assembly (markdown) --- Ploopy-Mini-Trackball-Kit-Assembly.md | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/Ploopy-Mini-Trackball-Kit-Assembly.md b/Ploopy-Mini-Trackball-Kit-Assembly.md index 21af691..5a8255f 100644 --- a/Ploopy-Mini-Trackball-Kit-Assembly.md +++ b/Ploopy-Mini-Trackball-Kit-Assembly.md @@ -201,14 +201,7 @@ Silicone is quite strong and doesn't rip easily. Take a look at the Scroll Wheel Holder Holder from above. It should be flush with the PCB, with no visible gap. -## Step 21: Attach the PCB Scroll Wheel Holder to the Base - -![pcb scroll wheel holder](https://lh3.googleusercontent.com/pw/ACtC-3cEAask2x6ErC5qUc0oB4a1gmfBzUwDNnFfrRnGgznI0rrOwa1N5oz_hYynYk_rRZZeicUTm-o9aE0VPgGXeWLtYIZw4nHyei593caNRX45Uibi7h9MrG_uSE_b6oBh2sxFAYqDyIbbAN7VMQW8xrDW=w1292-h969-no?authuser=0) - -- The PCB Scroll Wheel Holder is the piece of plastic sitting on top of the PCB. It shouldn't require too much force to put on. -- Once the PCB Scroll Wheel Holder is attached, the Scroll Wheel is fully assembled. Give it a few spins, and give it a few clicks, just to make sure that everything feels right. - -## Step 22: Prepare the Buttons +## Step 21: Prepare the Buttons ![base with buttons](https://lh3.googleusercontent.com/pw/ACtC-3cCRmP1wkdNh0uTAZQvgf1647nfaIRfc4LU1IH7oGC1b4lxAHCjKOPyC9n-Lai3ydSUYIB4aNuKaEj_vwE8FN0PGA7Ggo9chiQbQk9liWZ3gR96wTHSgjII8I5ATImmo1RJtOIzSYAlvCPE686W8grf=w1292-h969-no?authuser=0) @@ -218,13 +211,21 @@ Prepare the following components: - Secondary Buttons - 2x M3x8mm flat head screws -## Step 23: Attach the Primary Buttons +## Step 22: Attach the Primary Buttons -![primary buttons being screwed in](https://lh3.googleusercontent.com/pw/ACtC-3cs2C5MqTEXij6SLDuYxrYp_WZbGfRFXBvfPPTkAPFzo2yNFDQsuggFwPp2n3pGwPEdEFA_OO9fNdugoJF06hOsOjmqQ-6XKpO-1BP_vfPY1oCYt2ErJ1_HTknCy4JbZNMP-3SuNPCvPBDwWXwvJNPP=w1292-h969-no?authuser=0) + +- The right click button has to be bent a little to fit over the scroll wheel axle. Be patient and gentle. - Don't forget to insert the screw slowly, to ensure that you don't strip the plastic holding the screw in place. - Make sure the buttons are oriented correctly. The bottom of the buttons should be parallel to the base. +## Step 23: Attach the PCB Scroll Wheel Holder to the Base + + + +- The PCB Scroll Wheel Holder is the piece of plastic sitting on top of the PCB. It shouldn't require too much force to put on. +- Once the PCB Scroll Wheel Holder is attached, the Scroll Wheel is fully assembled. Give it a few spins, and give it a few clicks, just to make sure that everything feels right. + ## Step 24: Attach the Secondary Buttons ![secondary buttons screwed in](https://lh3.googleusercontent.com/pw/ACtC-3fo3SdCOHVNFVEjXXz0Q2To10e7p6CNbcCzTuBjbTEFTuQPqpm9eDhPYYwUnWSGBIrJ8BLoI1F04F74tT1KxmyIA7LHasAfSZOD4Vyumg9UxN7nbtuWJc_OUArmkt8EFtcHtkOHlM8DEEDFwMVarxwQ=w1292-h969-no?authuser=0)