Created Appendix G: Official Ploopy Headphones Fully Assembled Version Instructions, Revision A (markdown)
parent
47abcd557f
commit
2907a4fc02
50
Appendix-G:-Official-Ploopy-Headphones-Fully-Assembled-Version-Instructions,-Revision-A.md
Normal file
50
Appendix-G:-Official-Ploopy-Headphones-Fully-Assembled-Version-Instructions,-Revision-A.md
Normal file
|
@ -0,0 +1,50 @@
|
||||||
|
# BEFORE YOU DO ANYTHING, READ THIS FIRST.
|
||||||
|
|
||||||
|
**Do not flash new firmware until you've verified that the electronics are all working.**
|
||||||
|
|
||||||
|
That means, finish building the headphones, plug them in, use the stock firmware for about five minutes. Verify that everything is working.
|
||||||
|
|
||||||
|
Once you've verified that it all works, you're good to go flashing new firmware.
|
||||||
|
|
||||||
|
## Quick Assembly Instructions
|
||||||
|
|
||||||
|
Although the Ploopy Headphones that you purchased are "fully assembled", they require about five minutes of assembly work to put together. You can manage it, though. Have faith. It's easy.
|
||||||
|
|
||||||
|
## Step 1: Prepare the Headphones assembly
|
||||||
|
|
||||||
|

|
||||||
|
You will need the following:
|
||||||
|
|
||||||
|
- Headband
|
||||||
|
- Left Driver
|
||||||
|
- Right Driver
|
||||||
|
|
||||||
|
## Step 2: Insert the Headband Slider into the Headband assembly
|
||||||
|
|
||||||
|

|
||||||
|
- There should be quite a bit of resistance as you push the Headband Slider into the Headband. There should also be a "click" as you slide it that you can feel and hear.
|
||||||
|
|
||||||
|
## Step 3: Insert the other Headband Slider into the Headband
|
||||||
|
|
||||||
|

|
||||||
|
## Step 4: Prepare to assemble the Cable
|
||||||
|
|
||||||
|

|
||||||
|
You will need the following:
|
||||||
|
|
||||||
|
- Cable Y-Splitter
|
||||||
|
- 2 TRS Cables
|
||||||
|
- Wire Wrapper
|
||||||
|
|
||||||
|
## Step 5: Assemble the Cable
|
||||||
|
|
||||||
|

|
||||||
|
- It doesn't matter which TRS Cable goes into which jack of the Cable Y-Splitter.
|
||||||
|
- Braid the two TRS Cables into a braid. This is good practice to reduce the effects of electromagnetic interference, and it helps keep the wires tidy.
|
||||||
|
- Use the Wire Wrapper to hold the wires in place. The location of the Wire Wrapper can be adjusted later.
|
||||||
|
|
||||||
|
## Step 6: All done!
|
||||||
|
|
||||||
|
Congrats, you finished building the Ploopy Headphones!
|
||||||
|
|
||||||
|
It's done! Love them, use them, but don't you dare abuse them!
|
Loading…
Reference in New Issue