diff --git a/Appendix-G:-Official-Ploopy-Headphones-Fully-Assembled-Version-Instructions,-Revision-A.md b/Appendix-G:-Official-Ploopy-Headphones-Fully-Assembled-Version-Instructions,-Revision-A.md
new file mode 100644
index 0000000..53fd220
--- /dev/null
+++ b/Appendix-G:-Official-Ploopy-Headphones-Fully-Assembled-Version-Instructions,-Revision-A.md
@@ -0,0 +1,50 @@
+# BEFORE YOU DO ANYTHING, READ THIS FIRST.
+
+**Do not flash new firmware until you've verified that the electronics are all working.**
+
+That means, finish building the headphones, plug them in, use the stock firmware for about five minutes. Verify that everything is working.
+
+Once you've verified that it all works, you're good to go flashing new firmware.
+
+## Quick Assembly Instructions
+
+Although the Ploopy Headphones that you purchased are "fully assembled", they require about five minutes of assembly work to put together. You can manage it, though. Have faith. It's easy.
+
+## Step 1: Prepare the Headphones assembly
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8AsPazSPHZEK4yQERrnwp4TQg0sjZQdUvtd3AD9IDG8VgxIqSERsgAF7Pm-6HOX0kGwwiZYomQeKneXyni7TdHzzCQblX2m5OwCE9OOIwvwmeOAuDpQi2Tm7BK2p71MKpVEVUAMM6o38pe2HJO5ZOhS=w1434-h955-no?authuser=0)
+You will need the following:
+
+- Headband
+- Left Driver
+- Right Driver
+
+## Step 2: Insert the Headband Slider into the Headband assembly
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8Ap07fcP4Q7xuEMfiUx7Ig6tOR1ku542fUQvISPnfw2eQYxnwh-HjTAysms6pAcYyt7MMPDb7LSWYFAQPOOC0afaeLzh_jplwxjyFwNgLW8ZIIS6dpzjm0BCMo_wfnaKt654cJgk6o_cFcWOIq9jpVs=s955-no?authuser=0)
+- There should be quite a bit of resistance as you push the Headband Slider into the Headband. There should also be a "click" as you slide it that you can feel and hear.
+
+## Step 3: Insert the other Headband Slider into the Headband
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8DSIYaqcne1kcdR9Sr8iq72dy8lTdiil84Pb5bHET4iqH1OqjbMLF0CupiRwM2UdHW-enSkC_IHZpX-JXnWJekWXB15KFyoIt_P3Jme1WrHvik-D_gcCCd3w9SyaPnTB4E61dYGrtzVnANjIoFztIJd=w1435-h955-no?authuser=0)
+## Step 4: Prepare to assemble the Cable
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8Ag2Ikkt4Lm5rlEddzb4hpBEWbR_LaLeof9vyTDFu9f-1gpRr0SQa6x2IVs_2H232vEsr2A5053KE0wI9K-futvbl_b0PBqJKVvBWgJxF406rw7qvAOm-z9PsoRTt10pJvXbw1syo57fC0TNpmi2tpk=w1434-h955-no?authuser=0)
+You will need the following:
+
+- Cable Y-Splitter
+- 2 TRS Cables
+- Wire Wrapper
+
+## Step 5: Assemble the Cable
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8Daw1ZkFDH7USgkzjaBl5rKaqgKaGHLPgRLlUiPy7mZQM2Yo_8xKza3Ica66xzPlhBSEk3LpX4ysWGoRapsb1EZPtWWdQt2moi9m-vi4b7CCaDEUtJh6LQPjBQ_ncXPBJmYX7x8PxYc2NHf77_9ERpc=w1434-h955-no?authuser=0)
+- It doesn't matter which TRS Cable goes into which jack of the Cable Y-Splitter.
+- Braid the two TRS Cables into a braid. This is good practice to reduce the effects of electromagnetic interference, and it helps keep the wires tidy.
+- Use the Wire Wrapper to hold the wires in place. The location of the Wire Wrapper can be adjusted later.
+
+## Step 6: All done!
+
+Congrats, you finished building the Ploopy Headphones!
+
+It's done! Love them, use them, but don't you dare abuse them!