- These are the official Ploopy Top REVC, edited to remove the bearing
sockets.
- The idea is that these can be used for any future mods to use
different bearings.
- The ball used in newer Ploopy trackballs doesn't fit in the REVA top -
it's just slightly too big.
- I've designed an updated BTU mod for the REVC top, which should work
fine with the older ball.
* Clarify differences between BTU mod V3 and V4
- Added description
- V4 has now been tested so removed warning
- Added better image of v3
- Added image of v4
* Update printing and assembly recommendations
- The repo's wiki has much better 3D printing recommendations
- Previously was missing any mention of the M3 threaded inserts which
should be used. Now added and the wiki is also linked for those.
* Add files for Ploopy top without bearing sockets
- These files were created in Rhino by deleting the surfaces that made
up the bearing sockets and patching the holes that were left
- This is a good base for the BTU top or any other mods people want to
make
* Add BTU mod top piece v3
- This is the first full version of the BTU mod I created.
- v1 and v2 were just test pieces that mounted to the front screw
holes of the trackball to check clearances. They weren't really a
usable top as they didn't have anything other than the ball well.
- This part has been test printed on an Ender 3 and works well.
* Rename STEPs folder to STEP
* Add BTU mod v4
- This is a full remake compared to v3, which was designed in Rhino. To
make it more accessible for contributions, it's been redone in
FreeCAD. This means you can edit it with a free program as well as
making it parametric. The positions of the BTUs can be edited by
changing the values in the spreadsheet embedded in the CAD file.
- These parts haven't yet been test printed
* Add README for BTU mod
* Add more detail to mod README
- Print and assembly tips
- Some images to show what the mod actually is and what to cut off the
secondary buttons
* Rearrange bearing distributor list
- It didn't need to take up so many lines
- Also added Bosch's contact locator tool to make it easier for people
to find other distributors, as suggested by /u/d4baller
George Bryant