#
#                       Policy file for FreeBSD
#
# $FreeBSD: ports/security/tripwire/files/twpol.txt,v 1.2 2002/03/04 16:55:21 cy Exp $
# $Id: twpol-FreeBSD.txt,v 1.1 2003/06/08 02:00:06 pherman Exp $

#
# This is the example Tripwire Policy file.  It is intended as a place to
# start creating your own custom Tripwire Policy file.  Referring to it as
# well as the Tripwire Policy Guide should give you enough information to
# make a good custom Tripwire Policy file that better covers your
# configuration and security needs.  A text version of this policy file is
# called twpol.txt.
#
# Note that this file is tuned to an install of FreeBSD using
# buildworld.  If run unmodified, this file should create no errors on
# database creation, or violations on a subsiquent integrity check.
# However it is impossible for there to be one policy file for all machines,
# so this existing one errs on the side of security.  Your FreeBSD
# configuration will most likey differ from the one our policy file was
# tuned to, and will therefore require some editing of the default
# Tripwire Policy file.
#
# The example policy file is best run with 'Loose Directory Checking'
# enabled. Set LOOSEDIRECTORYCHECKING=TRUE in the Tripwire Configuration
# file.
#
# Email support is not included and must be added to this file.
# Add the 'emailto=' to the rule directive section of each rule (add a comma
# after the 'severity=' line and add an 'emailto=' and include the email
# addresses you want the violation reports to go to).  Addresses are
# semi-colon delimited.
#



#
# Global Variable Definitions
#
# These are defined at install time by the installation script.  You may
# Manually edit these if you are using this file directly and not from the
# installation script itself.
#

@@section GLOBAL
TWROOT=;
TWBIN=;
TWPOL=;
TWDB=;
TWSKEY=;
TWLKEY=;
TWREPORT=;
HOSTNAME=;

@@section FS
SEC_CRIT      = $(IgnoreNone)-SHa ;  # Critical files that cannot change
SEC_SUID      = $(IgnoreNone)-SHa ;  # Binaries with the SUID or SGID flags set
SEC_BIN       = $(ReadOnly) ;        # Binaries that should not change
SEC_CONFIG    = $(Dynamic) ;         # Config files that are changed infrequently but accessed often
SEC_TTY    = $(Dynamic)-ugp ;        # Tty files that change ownership at login
SEC_LOG       = $(Growing) ;         # Files that grow, but that should never change ownership
SEC_INVARIANT = +tpug ;              # Directories that should never change permission or ownership
SIG_LOW       = 33 ;                 # Non-critical files that are of minimal security impact
SIG_MED       = 66 ;                 # Non-critical files that are of significant security impact
SIG_HI        = 100 ;                # Critical files that are significant points of vulnerability


# Tripwire Binaries
(
  rulename = "Tripwire Binaries",
  severity = $(SIG_HI)
)
{
  $(TWBIN)/siggen                      -> $(SEC_BIN) ;
  $(TWBIN)/tripwire                    -> $(SEC_BIN) ;
  $(TWBIN)/twadmin                     -> $(SEC_BIN) ;
  $(TWBIN)/twprint                     -> $(SEC_BIN) ;
}

# Tripwire Data Files - Configuration Files, Policy Files, Keys, Reports, Databases
(
  rulename = "Tripwire Data Files",
  severity = $(SIG_HI)
)
{
  # NOTE: We remove the inode attribute because when Tripwire creates a backup,
  # it does so by renaming the old file and creating a new one (which will
  # have a new inode number).  Inode is left turned on for keys, which shouldn't
  # ever change.

  # NOTE: The first integrity check triggers this rule and each integrity check
  # afterward triggers this rule until a database update is run, since the
  # database file does not exist before that point.

  $(TWDB)                              -> $(SEC_CONFIG) -i ;
  $(TWPOL)/tw.pol                      -> $(SEC_BIN) -i ;
  $(TWPOL)/tw.cfg                      -> $(SEC_BIN) -i ;
  $(TWPOL)/twcfg.txt                   -> $(SEC_BIN) ;
  $(TWPOL)/twpol.txt                   -> $(SEC_BIN) ;
  $(TWLKEY)/$(HOSTNAME)-local.key      -> $(SEC_BIN) ;
  $(TWSKEY)/site.key                   -> $(SEC_BIN) ;

  #don't scan the individual reports
  $(TWREPORT)                          -> $(SEC_CONFIG) (recurse=0) ;
}


# Tripwire HQ Connector Binaries
#(
#  rulename = "Tripwire HQ Connector Binaries",
#  severity = $(SIG_HI)
#)
#{
#  $(TWBIN)/hqagent                     -> $(SEC_BIN) ;
#}
#
# Tripwire HQ Connector - Configuration Files, Keys, and Logs

#
# Note: File locations here are different than in a stock HQ Connector
# installation.  This is because Tripwire 2.3 uses a different path
# structure than Tripwire 2.2.1.
#
# You may need to update your HQ Agent configuation file (or this policy
# file) to correct the paths.  We have attempted to support the FHS standard
# here by placing the HQ Agent files similarly to the way Tripwire 2.3
# places them.
#

#(
#  rulename = "Tripwire HQ Connector Data Files",
#  severity = $(SIG_HI)
#)
#{
#
# # NOTE: Removing the inode attribute because when Tripwire creates a backup
# # it does so by renaming the old file and creating a new one (which will
# # have a new inode number).  Leaving inode turned on for keys, which
# # shouldn't ever change.
#
#
#  $(TWBIN)/agent.cfg                   -> $(SEC_BIN) -i ;
#  $(TWLKEY)/authentication.key         -> $(SEC_BIN) ;
#  $(TWDB)/tasks.dat                    -> $(SEC_CONFIG) ;
#  $(TWDB)/schedule.dat                 -> $(SEC_CONFIG) ;
#
#  # Uncomment if you have agent logging enabled.
#  #/var/log/tripwire/agent.log      -> $(SEC_LOG) ;
#}



# Commonly accessed directories that should remain static with regards to owner and group
(
  rulename = "Invariant Directories",
  severity = $(SIG_MED)
)
{
  /                                    -> $(SEC_INVARIANT) (recurse = false) ;
  /home                                -> $(SEC_INVARIANT) (recurse = false) ;
}

#
# First, root's "home"
#

(
  rulename = "Root's home",
  severity = $(SIG_HI)
)
{
  # /.rhosts				-> $(SEC_CRIT) ;
  /.profile				-> $(SEC_CRIT) ;
  /.cshrc				-> $(SEC_CRIT) ;
  /.login				-> $(SEC_CRIT) ;
  # /.exrc				-> $(SEC_CRIT) ;
  # /.logout				-> $(SEC_CRIT) ;
  # /.forward				-> $(SEC_CRIT) ;
  /root					-> $(SEC_CRIT) (recurse = true) ;
  !/root/.history ;
  !/root/.bash_history ;
  # !/root/.lsof_SYSTEM_NAME ;	# Uncomment if lsof is installed
}


#
# FreeBSD Kernel
#

(
  rulename = "FreeBSD Kernel",
  severity = $(SIG_HI)
)
{
  /kernel				-> $(SEC_CRIT) ;
  /kernel.old				-> $(SEC_CRIT) ;
  /kernel.GENERIC			-> $(SEC_CRIT) ;
}


#
# FreeBSD Modules
#

(
  rulename = "FreeBSD Modules",
  severity = $(SIG_HI)
)
{
  /modules				-> $(SEC_CRIT) (recurse = true) ;
  /modules.old				-> $(SEC_CRIT) (recurse = true) ;
  # /lkm				-> $(SEC_CRIT) (recurse = true) ; # uncomment if using lkm kld
}


#
# System Administration Programs
#

(
  rulename = "System Administration Programs",
  severity = $(SIG_HI)
)
{
  /sbin					-> $(SEC_CRIT) (recurse = true) ;
  /usr/sbin				-> $(SEC_CRIT) (recurse = true) ;
}


#
# User Utilities
#

(
  rulename = "User Utilities",
  severity = $(SIG_HI)
)
{
  /bin					-> $(SEC_CRIT) (recurse = true) ;
  /usr/bin				-> $(SEC_CRIT) (recurse = true) ;
}


#
# /dev
#

(
  rulename = "/dev",
  severity = $(SIG_HI)
)
{
  /dev					-> $(Device) (recurse = true) ;
  !/dev/vga ;
  !/dev/dri ;
  /dev/console				-> $(SEC_TTY) ;
  /dev/ttyv0				-> $(SEC_TTY) ;
  /dev/ttyv1				-> $(SEC_TTY) ;
  /dev/ttyv2				-> $(SEC_TTY) ;
  /dev/ttyv3				-> $(SEC_TTY) ;
  /dev/ttyv4				-> $(SEC_TTY) ;
  /dev/ttyv5				-> $(SEC_TTY) ;
  /dev/ttyv6				-> $(SEC_TTY) ;
  /dev/ttyv7				-> $(SEC_TTY) ;
  /dev/ttyp0				-> $(SEC_TTY) ;
  /dev/ttyp1				-> $(SEC_TTY) ;
  /dev/ttyp2				-> $(SEC_TTY) ;
  /dev/ttyp3				-> $(SEC_TTY) ;
  /dev/ttyp4				-> $(SEC_TTY) ;
  /dev/ttyp5				-> $(SEC_TTY) ;
  /dev/ttyp6				-> $(SEC_TTY) ;
  /dev/ttyp7				-> $(SEC_TTY) ;
  /dev/ttyp8				-> $(SEC_TTY) ;
  /dev/ttyp9				-> $(SEC_TTY) ;
  /dev/ttypa				-> $(SEC_TTY) ;
  /dev/ttypb				-> $(SEC_TTY) ;
  /dev/ttypc				-> $(SEC_TTY) ;
  /dev/ttypd				-> $(SEC_TTY) ;
  /dev/ttype				-> $(SEC_TTY) ;
  /dev/ttypf				-> $(SEC_TTY) ;
  /dev/ttypg				-> $(SEC_TTY) ;
  /dev/ttyph				-> $(SEC_TTY) ;
  /dev/ttypi				-> $(SEC_TTY) ;
  /dev/ttypj				-> $(SEC_TTY) ;
  /dev/ttypl				-> $(SEC_TTY) ;
  /dev/ttypm				-> $(SEC_TTY) ;
  /dev/ttypn				-> $(SEC_TTY) ;
  /dev/ttypo				-> $(SEC_TTY) ;
  /dev/ttypp				-> $(SEC_TTY) ;
  /dev/ttypq				-> $(SEC_TTY) ;
  /dev/ttypr				-> $(SEC_TTY) ;
  /dev/ttyps				-> $(SEC_TTY) ;
  /dev/ttypt				-> $(SEC_TTY) ;
  /dev/ttypu				-> $(SEC_TTY) ;
  /dev/ttypv				-> $(SEC_TTY) ;
  /dev/cuaa0				-> $(SEC_TTY) ;	# modem
}


#
# /etc
#

(
  rulename = "/etc",
  severity = $(SIG_HI)
)
{
  /etc					-> $(SEC_CRIT) (recurse = true) ;
  # /etc/mail/aliases			-> $(SEC_CONFIG) ;
  /etc/dumpdates			-> $(SEC_CONFIG) ;
  /etc/motd				-> $(SEC_CONFIG) ;
  !/etc/ppp/connect-errors ;
  /etc/skeykeys				-> $(SEC_CONFIG) ;
  # Uncomment the following 4 lines if your password file does not change
  # /etc/passwd				-> $(SEC_CONFIG) ;
  # /etc/master.passwd			-> $(SEC_CONFIG) ;
  # /etc/pwd.db				-> $(SEC_CONFIG) ;
  # /etc/spwd.db			-> $(SEC_CONFIG) ;
}


#
# Copatibility (Linux)
#

(
  rulename = "Linux Compatibility",
  severity = $(SIG_HI)
)
{
  /compat				-> $(SEC_CRIT) (recurse = true) ;
#
# Uncomment the following if Linux compatibility is used.  Replace
# HOSTNAME1 and HOSTNAME2 with the hosts that have Linux emulation port
# installed.
#
#@@ifhost HOSTNAME1 || HOSTNAME2
#  /compat/linux/etc			-> $(SEC_INVARIANT) (recurse = false) ;
#  /compat/linux/etc/X11			-> $(SEC_CONFIG) (recurse = true) ;
#  /compat/linux/etc/pam.d		-> $(SEC_CONFIG) (recurse = true) ;
#  /compat/linux/etc/profile.d		-> $(SEC_CONFIG) (recurse = true) ;
#  /compat/linux/etc/real		-> $(SEC_CONFIG) (recurse = true) ;
#  /compat/linux/etc/bashrc		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/csh.login		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/host.conf		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/hosts.allow		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/hosts.deny		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/info-dir		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/inputrc		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/ld.so.conf		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/nsswitch.conf	-> $(SEC_CONFIG) ;
#  /compat/linux/etc/profile		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/redhat-release	-> $(SEC_CONFIG) ;
#  /compat/linux/etc/rpc			-> $(SEC_CONFIG) ;
#  /compat/linux/etc/securetty		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/shells		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/termcap		-> $(SEC_CONFIG) ;
#  /compat/linux/etc/yp.conf		-> $(SEC_CONFIG) ;
#  !/compat/linux/etc/ld.so.cache ;
#  !/compat/linux/var/spool/mail ;
#@@endif
}


#
# Libraries, include files, and other system files
#

(
  rulename = "Libraries, include files, and other system files",
  severity = $(SIG_HI)
)
{
  /usr/include				-> $(SEC_CRIT) (recurse = true) ;
  /usr/lib				-> $(SEC_CRIT) (recurse = true) ;
  /usr/libdata				-> $(SEC_CRIT) (recurse = true) ;
  /usr/libexec				-> $(SEC_CRIT) (recurse = true) ;
  /usr/share				-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man			-> $(SEC_CONFIG) ;
  !/usr/share/man/whatis ;
  !/usr/share/man/.glimpse_filenames ;
  !/usr/share/man/.glimpse_filenames_index ;
  !/usr/share/man/.glimpse_filetimes ;
  !/usr/share/man/.glimpse_filters ;
  !/usr/share/man/.glimpse_index ;
  !/usr/share/man/.glimpse_messages ;
  !/usr/share/man/.glimpse_partitions ;
  !/usr/share/man/.glimpse_statistics ;
  !/usr/share/man/.glimpse_turbo ;
  /usr/share/man/man1			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/man2			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/man3			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/man4			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/man5			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/man6			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/man7			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/man8			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/man9			-> $(SEC_CRIT) (recurse = true) ;
  /usr/share/man/mann			-> $(SEC_CRIT) (recurse = true) ;
  ! /usr/share/man/cat1 ;
  ! /usr/share/man/cat2 ;
  ! /usr/share/man/cat3 ;
  ! /usr/share/man/cat4 ;
  ! /usr/share/man/cat5 ;
  ! /usr/share/man/cat6 ;
  ! /usr/share/man/cat7 ;
  ! /usr/share/man/cat8 ;
  ! /usr/share/man/cat9 ;
  ! /usr/share/man/catl ;
  ! /usr/share/man/catn ;
  /usr/share/perl/man			-> $(SEC_CONFIG) ;
  !/usr/share/perl/man/whatis ;
  !/usr/share/perl/man/.glimpse_filenames ;
  !/usr/share/perl/man/.glimpse_filenames_index ;
  !/usr/share/perl/man/.glimpse_filetimes ;
  !/usr/share/perl/man/.glimpse_filters ;
  !/usr/share/perl/man/.glimpse_index ;
  !/usr/share/perl/man/.glimpse_messages ;
  !/usr/share/perl/man/.glimpse_partitions ;
  !/usr/share/perl/man/.glimpse_statistics ;
  !/usr/share/perl/man/.glimpse_turbo ;
  /usr/share/perl/man/man3		-> $(SEC_CRIT) (recurse = true) ;
  ! /usr/share/perl/man/cat3 ;
  /usr/local/lib/perl5/5.00503/man	-> $(SEC_CONFIG) ;
  ! /usr/local/lib/perl5/5.00503/man/whatis ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_filters ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_filetimes ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_messages ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_statistics ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_index ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_turbo ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_partitions ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_filenames ;
  ! /usr/local/lib/perl5/5.00503/man/.glimpse_filenames_index ;
  /usr/local/lib/perl5/5.00503/man/man3		-> $(SEC_CRIT) (recurse = true) ;
  ! /usr/local/lib/perl5/5.00503/man/cat3 ;
}


#
# X11R6
#

(
  rulename = "X11R6",
  severity = $(SIG_HI)
)
{
  /usr/X11R6				-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/lib/X11/xdm		-> $(SEC_CONFIG) (recurse = true) ;
  !/usr/X11R6/lib/X11/xdm/xdm-errors ;
  !/usr/X11R6/lib/X11/xdm/authdir/authfiles ;
  !/usr/X11R6/lib/X11/xdm/xdm-pid ;
  /usr/X11R6/lib/X11/xkb/compiled	-> $(SEC_CONFIG) (recurse = true) ;
  /usr/X11R6/man			-> $(SEC_CONFIG) ;
  !/usr/X11R6/man/whatis ;
  !/usr/X11R6/man/.glimpse_filenames ;
  !/usr/X11R6/man/.glimpse_filenames_index ;
  !/usr/X11R6/man/.glimpse_filetimes ;
  !/usr/X11R6/man/.glimpse_filters ;
  !/usr/X11R6/man/.glimpse_index ;
  !/usr/X11R6/man/.glimpse_messages ;
  !/usr/X11R6/man/.glimpse_partitions ;
  !/usr/X11R6/man/.glimpse_statistics ;
  !/usr/X11R6/man/.glimpse_turbo ;
  /usr/X11R6/man/man1			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/man2			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/man3			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/man4			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/man5			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/man6			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/man7			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/man8			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/man9			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/manl			-> $(SEC_CRIT) (recurse = true) ;
  /usr/X11R6/man/mann			-> $(SEC_CRIT) (recurse = true) ;
  ! /usr/X11R6/man/cat1 ;
  ! /usr/X11R6/man/cat2 ;
  ! /usr/X11R6/man/cat3 ;
  ! /usr/X11R6/man/cat4 ;
  ! /usr/X11R6/man/cat5 ;
  ! /usr/X11R6/man/cat6 ;
  ! /usr/X11R6/man/cat7 ;
  ! /usr/X11R6/man/cat8 ;
  ! /usr/X11R6/man/cat9 ;
  ! /usr/X11R6/man/catl ;
  ! /usr/X11R6/man/catn ;
}


#
# sources
#

(
  rulename = "Sources",
  severity = $(SIG_HI)
)
{
  /usr/src				-> $(SEC_CRIT) (recurse = true) ;
  /usr/src/sys/compile			-> $(SEC_CONFIG) (recurse = false) ;
}


#
# NIS
#

(
  rulename = "NIS",
  severity = $(SIG_HI)
)
{
  /var/yp				-> $(SEC_CRIT) (recurse = true) ;
  !/var/yp/binding ;
}


#
# Temporary directories
#
(
  rulename = "Temporary directories",
  recurse = false,
  severity = $(SIG_LOW)
)
{
  /usr/tmp                             -> $(SEC_INVARIANT) ;
  /var/tmp                             -> $(SEC_INVARIANT) ;
  /var/preserve                        -> $(SEC_INVARIANT) ;
  /tmp                                 -> $(SEC_INVARIANT) ;
}

#
# Local files
#

(
  rulename = "Local files",
  severity = $(SIG_MED)
)
{
  /usr/local/bin			-> $(SEC_BIN) (recurse = true) ;
  /usr/local/sbin			-> $(SEC_BIN) (recurse = true) ;
  /usr/local/etc		 	-> $(SEC_BIN) (recurse = true) ;
  /usr/local/lib			-> $(SEC_BIN) (recurse = true ) ;
  /usr/local/libexec			-> $(SEC_BIN) (recurse = true ) ;
  /usr/local/share			-> $(SEC_BIN) (recurse = true ) ;
  /usr/local/man			-> $(SEC_CONFIG) ;
  !/usr/local/man/whatis ;
  !/usr/local/man/.glimpse_filenames ;
  !/usr/local/man/.glimpse_filenames_index ;
  !/usr/local/man/.glimpse_filetimes ;
  !/usr/local/man/.glimpse_filters ;
  !/usr/local/man/.glimpse_index ;
  !/usr/local/man/.glimpse_messages ;
  !/usr/local/man/.glimpse_partitions ;
  !/usr/local/man/.glimpse_statistics ;
  !/usr/local/man/.glimpse_turbo ;
  /usr/local/man/man1			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/man2			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/man3			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/man4			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/man5			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/man6			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/man7			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/man8			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/man9			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/manl			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/man/mann			-> $(SEC_CRIT) (recurse = true) ;
  ! /usr/local/man/cat1 ;
  ! /usr/local/man/cat2 ;
  ! /usr/local/man/cat3 ;
  ! /usr/local/man/cat4 ;
  ! /usr/local/man/cat5 ;
  ! /usr/local/man/cat6 ;
  ! /usr/local/man/cat7 ;
  ! /usr/local/man/cat8 ;
  ! /usr/local/man/cat9 ;
  ! /usr/local/man/catl ;
  ! /usr/local/man/catn ;
  /usr/local/krb5			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man			-> $(SEC_CONFIG) ;
  !/usr/local/krb5/man/whatis ;
  !/usr/local/krb5/man/.glimpse_filenames ;
  !/usr/local/krb5/man/.glimpse_filenames_index ;
  !/usr/local/krb5/man/.glimpse_filetimes ;
  !/usr/local/krb5/man/.glimpse_filters ;
  !/usr/local/krb5/man/.glimpse_index ;
  !/usr/local/krb5/man/.glimpse_messages ;
  !/usr/local/krb5/man/.glimpse_partitions ;
  !/usr/local/krb5/man/.glimpse_statistics ;
  !/usr/local/krb5/man/.glimpse_turbo ;
  /usr/local/krb5/man/man1			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/man2			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/man3			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/man4			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/man5			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/man6			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/man7			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/man8			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/man9			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/manl			-> $(SEC_CRIT) (recurse = true) ;
  /usr/local/krb5/man/mann			-> $(SEC_CRIT) (recurse = true) ;
  ! /usr/local/krb5/man/cat1 ;
  ! /usr/local/krb5/man/cat2 ;
  ! /usr/local/krb5/man/cat3 ;
  ! /usr/local/krb5/man/cat4 ;
  ! /usr/local/krb5/man/cat5 ;
  ! /usr/local/krb5/man/cat6 ;
  ! /usr/local/krb5/man/cat7 ;
  ! /usr/local/krb5/man/cat8 ;
  ! /usr/local/krb5/man/cat9 ;
  ! /usr/local/krb5/man/catl ;
  ! /usr/local/krb5/man/catn ;
  /usr/local/www			-> $(SEC_CONFIG) (recurse = true) ;
}


(
  rulename = "Security Control",
  severity = $(SIG_HI)
)
{
  /etc/group                           -> $(SEC_CRIT) ;
  /etc/crontab                         -> $(SEC_CRIT) ;
}

#=============================================================================
#
# Copyright 2000-2017 Tripwire, Inc. Tripwire is a registered trademark of Tripwire,
# Inc. in the United States and other countries. All rights reserved.
#
# FreeBSD is a registered trademark of the FreeBSD Project Inc.
#
# UNIX is a registered trademark of The Open Group.
#
#=============================================================================
#
# Permission is granted to make and distribute verbatim copies of this document
# provided the copyright notice and this permission notice are preserved on all
# copies.
#
# Permission is granted to copy and distribute modified versions of this
# document under the conditions for verbatim copying, provided that the entire
# resulting derived work is distributed under the terms of a permission notice
# identical to this one.
#
# Permission is granted to copy and distribute translations of this document
# into another language, under the above conditions for modified versions,
# except that this permission notice may be stated in a translation approved by
# Tripwire, Inc.
#
# DCM
