diff --git a/README.md b/README.md
index 21a173d..554e725 100644
--- a/README.md
+++ b/README.md
@@ -12,47 +12,47 @@ curl -sL https://git.nixc.us/colin/OpenSCAD/raw/branch/main/install.sh | bash
 
 ### What the Script Does
 
-	1.	Checks for Homebrew and installs it if not found.
-	1.	Installs OpenSCAD using Homebrew if it is not already installed.
-	1.	Creates the OpenSCAD libraries directory if it does not exist.
-	1.	Clones or updates the following libraries into the OpenSCAD libraries directory:
-	1.	BOSL2: https://github.com/BelfrySCAD/BOSL2
-	1.	BOSL: https://github.com/revarbat/BOSL
-	1.	MCAD: https://github.com/openscad/MCAD
-	1.	BOLTS: https://github.com/boltsparts/BOLTS
-	1.	Nuts and Bolts: https://github.com/JohK/nutsnbolts
-	1.	OpenSCAD Fillets: https://github.com/jfhbrook/openscad-fillets
-	1.	Shape Library: https://github.com/cznewt/openscad-model-library
-	1.	OpenSCAD Connectors: https://github.com/kellyegan/OpenSCAD-Arduino-Mounting-Library
-	1.	BezierScad: https://github.com/chadkirby/BezierScad
-	1.	Tracklib: https://github.com/joostn/OpenSCAD-Track
-	1.	Chamfers for OpenSCAD: https://github.com/SebiTimeWaster/Chamfers-for-OpenSCAD
-	1.	U-Joint Library: https://github.com/celer/openjscad-u-joints
-	1.	Validates the installation and reports success or failure.
+1.	Checks for Homebrew and installs it if not found.
+1.	Installs OpenSCAD using Homebrew if it is not already installed.
+1.	Creates the OpenSCAD libraries directory if it does not exist.
+1.	Clones or updates the following libraries into the OpenSCAD libraries directory:
+1.	BOSL2: https://github.com/BelfrySCAD/BOSL2
+1.	BOSL: https://github.com/revarbat/BOSL
+1.	MCAD: https://github.com/openscad/MCAD
+1.	BOLTS: https://github.com/boltsparts/BOLTS
+1.	Nuts and Bolts: https://github.com/JohK/nutsnbolts
+1.	OpenSCAD Fillets: https://github.com/jfhbrook/openscad-fillets
+1.	Shape Library: https://github.com/cznewt/openscad-model-library
+1.	OpenSCAD Connectors: https://github.com/kellyegan/OpenSCAD-Arduino-Mounting-Library
+1.	BezierScad: https://github.com/chadkirby/BezierScad
+1.	Tracklib: https://github.com/joostn/OpenSCAD-Track
+1.	Chamfers for OpenSCAD: https://github.com/SebiTimeWaster/Chamfers-for-OpenSCAD
+1.	U-Joint Library: https://github.com/celer/openjscad-u-joints
+1.	Validates the installation and reports success or failure.
 
 ### Verifying the Installation
-	1.	Open OpenSCAD and create a new file.
-	1.	Add the following test code:
-		```
-		use <BOSL2/std.scad>;
+1.	Open OpenSCAD and create a new file.
+1.	Add the following test code:
+```
+use <BOSL2/std.scad>;
 
-		cube([10, 10, 10], center = true);
-		```
+cube([10, 10, 10], center = true);
+```
 
-	1.	Press F5 (Preview) or F6 (Render). If no errors appear, the installation was successful.
+1.	Press F5 (Preview) or F6 (Render). If no errors appear, the installation was successful.
 
 ### Troubleshooting
-	1.	Ensure Homebrew is installed by visiting https://brew.sh/.
-	1.	Verify Git is installed and accessible by running git --version.
-	1.	Confirm the libraries exist in the OpenSCAD libraries directory:
-		```
-		ls ~/Documents/OpenSCAD/libraries/
-		```
+1.	Ensure Homebrew is installed by visiting https://brew.sh/.
+1.	Verify Git is installed and accessible by running git --version.
+1.	Confirm the libraries exist in the OpenSCAD libraries directory:
+```
+ls ~/Documents/OpenSCAD/libraries/
+```
 
-	1.	Verify OpenSCAD is installed by running:
-		```
-		openscad --version
-		```
+1.	Verify OpenSCAD is installed by running:
+```
+openscad --version
+```
 ---
 
 Refer to the documentation or GitHub repositories for additional support or information.
\ No newline at end of file