diff --git a/Ploopy-Nano-Trackball-Kit-Assembly.md b/Ploopy-Nano-Trackball-Kit-Assembly.md
index 441d453..fd26e4c 100644
--- a/Ploopy-Nano-Trackball-Kit-Assembly.md
+++ b/Ploopy-Nano-Trackball-Kit-Assembly.md
@@ -38,10 +38,12 @@ Before soldering:
 
 ![sensor closeup](https://lh3.googleusercontent.com/pw/ACtC-3eV-_NGdHU6_lseNDwQNEYdhP2pU4dlLXr_nQP4qaUu9SjPPiekB60SaKgfqAfV1qd4cJXjlg3oHMhH0DLl_KtIObCiyTvOR4o70XgHdLoTIwW2XrDh-aepTa5W7z_p5OAv9XlZX_tcgoTvWy0VapQu=w1069-h801-no?authuser=0)
 
-Here's a close-up of the solder joints from the other side:
+## Step X: Remove the small kaptop tab protecting the sensor
 
 ![solder joints](https://lh3.googleusercontent.com/pw/ACtC-3fyP8khHxgCprY_iDtRBXbUFHCEVn-O9Rt_AkUWCw0s99O_dYZy_K77q1z32IcxJUwp-6R1M09cvJFps2CrS8zET4lkS5zCkwdmIiGrLg3KTRM07dJxlzu90BoxSBCbvomYfX6HKONyYS2mzCaT29sY=w1069-h801-no?authuser=0)
 
+Now is also a good time to check your solder joints.
+
 ## Step X: Place aluminum tape into base
 
 ![tape](https://lh3.googleusercontent.com/pw/ACtC-3d9UbLziBUMN5b6--u1oxXTqjtTK-M7ExZu-C9gDvX0KrOm4bzyQKhv2_-edGeQs4tsiYpPKo79292tXBzKABwMcl9gXUDaShzeAJ68laHpNikSrBsp2svlkgOZxUZzwL6IKDAyFVufOJhRtmJaq0C8=w1068-h801-no?authuser=0)