From 07e68f9ab079b4e411b3aba17a3b04c2245bf7b5 Mon Sep 17 00:00:00 2001 From: ploopyco <54917504+ploopyco@users.noreply.github.com> Date: Thu, 18 Feb 2021 22:18:10 -0500 Subject: [PATCH] Updated Ploopy Nano Trackball Kit Assembly (markdown) --- Ploopy-Nano-Trackball-Kit-Assembly.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Ploopy-Nano-Trackball-Kit-Assembly.md b/Ploopy-Nano-Trackball-Kit-Assembly.md index d15389d..5470f6d 100644 --- a/Ploopy-Nano-Trackball-Kit-Assembly.md +++ b/Ploopy-Nano-Trackball-Kit-Assembly.md @@ -38,7 +38,7 @@ Before soldering: ![sensor closeup](https://lh3.googleusercontent.com/pw/ACtC-3eV-_NGdHU6_lseNDwQNEYdhP2pU4dlLXr_nQP4qaUu9SjPPiekB60SaKgfqAfV1qd4cJXjlg3oHMhH0DLl_KtIObCiyTvOR4o70XgHdLoTIwW2XrDh-aepTa5W7z_p5OAv9XlZX_tcgoTvWy0VapQu=w1069-h801-no?authuser=0) -## Step 4: Remove the small kaptop tab protecting the sensor +## Step 4: Remove the small kapton tab protecting the sensor ![solder joints](https://lh3.googleusercontent.com/pw/ACtC-3fyP8khHxgCprY_iDtRBXbUFHCEVn-O9Rt_AkUWCw0s99O_dYZy_K77q1z32IcxJUwp-6R1M09cvJFps2CrS8zET4lkS5zCkwdmIiGrLg3KTRM07dJxlzu90BoxSBCbvomYfX6HKONyYS2mzCaT29sY=w1069-h801-no?authuser=0) @@ -130,9 +130,9 @@ Prepare the following components: ![rubbing ball](https://lh3.googleusercontent.com/pw/ACtC-3frmIPsen7qfeDoD6m-EnXQGOjiUJqeyGgMcVIoJXzCN2ZgIh-Xd4qyybv_wyCh2UF9OaaCMZx36sbO7LQCGQnI2aXD4F04sSNAWblfHTyBTBzSUqibdYfhPFRY-E3iWgL-WPMTttN6-B9m3G3ccsW4=w1069-h801-no?authuser=0) -- If the ball is too shiny, the sensor isn't going to pick up a lot of the detail on the ball -- Therefore, in order to make the Ploopy Nano function better, you'll have to remove a bit of the shine on the ball -- Rub the ball in your own hands for about two minutes, and you'll be done +- If the ball is too shiny, the sensor isn't going to pick up a lot of the detail on the ball. +- Therefore, in order to make the Ploopy Nano function better, you'll have to remove a bit of the shine on the ball. +- Rub the ball in your own hands for about two minutes, and you'll be done. ## Step 18: Insert the ball