public release of electronics and mechanical files

LICENSE.md

@@ -1,189 +1,289 @@
-CERN Open Hardware Licence v1.2 
+CERN Open Hardware Licence Version 2 - Strongly Reciprocal
+
 
 Preamble
 
-Through this CERN Open Hardware Licence ("CERN OHL") version 1.2, CERN
+CERN has developed this licence to promote collaboration among
-wishes to provide a tool to foster collaboration and sharing among
+hardware designers and to provide a legal tool which supports the
-hardware designers.  The CERN OHL is copyright CERN. Anyone is welcome
+freedom to use, study, modify, share and distribute hardware designs
-to use the CERN OHL, in unmodified form only, for the distribution of
+and products based on those designs. Version 2 of the CERN Open
-their own Open Hardware designs. Any other right is reserved. Release
+Hardware Licence comes in three variants: CERN-OHL-P (permissive); and
-of hardware designs under the CERN OHL does not constitute an
+two reciprocal licences: CERN-OHL-W (weakly reciprocal) and this
-endorsement of the licensor or its designs nor does it imply any
+licence, CERN-OHL-S (strongly reciprocal).
-involvement by CERN in the development of such designs.
 
-1. Definitions
+The CERN-OHL-S is copyright CERN 2020. Anyone is welcome to use it, in
+unmodified form only.
 
-In this Licence, the following terms have the following meanings:
+Use of this Licence does not imply any endorsement by CERN of any
- 
+Licensor or their designs nor does it imply any involvement by CERN in
-“Licence” means this CERN OHL.
+their development.
 
-“Documentation” means schematic diagrams, designs, circuit or circuit
-board layouts, mechanical drawings, flow charts and descriptive text,
-and other explanatory material that is explicitly stated as being made
-available under the conditions of this Licence. The Documentation may
-be in any medium, including but not limited to computer files and
-representations on paper, film, or any other media.
 
-“Documentation Location” means a location where the Licensor has
+1 Definitions
-placed Documentation, and which he believes will be publicly
-accessible for at least three years from the first communication to
-the public or distribution of Documentation.
 
-“Product” means either an entire, or any part of a, device built using
+  1.1 'Licence' means this CERN-OHL-S.
-the Documentation or the modified Documentation.
 
-“Licensee” means any natural or legal person exercising rights under
+  1.2 'Compatible Licence' means
-this Licence.
 
-“Licensor” means any natural or legal person that creates or modifies
+       a) any earlier version of the CERN Open Hardware licence, or
-Documentation and subsequently communicates to the public and/ or
-distributes the resulting Documentation under the terms and conditions
-of this Licence.
 
-A Licensee may at the same time be a Licensor, and vice versa. 
+       b) any version of the CERN-OHL-S, or
 
-Use of the masculine gender includes the feminine and neuter genders
+       c) any licence which permits You to treat the Source to which
-and is employed solely to facilitate reading.
+          it applies as licensed under CERN-OHL-S provided that on
+          Conveyance of any such Source, or any associated Product You
+          treat the Source in question as being licensed under
+          CERN-OHL-S.
 
-2. Applicability
+  1.3 'Source' means information such as design materials or digital
+      code which can be applied to Make or test a Product or to
+      prepare a Product for use, Conveyance or sale, regardless of its
+      medium or how it is expressed. It may include Notices.
 
-2.1. This Licence governs the use, copying, modification,
+  1.4 'Covered Source' means Source that is explicitly made available
-communication to the public and distribution of the Documentation, and
+      under this Licence.
-the manufacture and distribution of Products. By exercising any right
-granted under this Licence, the Licensee irrevocably accepts these
-terms and conditions.
 
-2.2. This Licence is granted by the Licensor directly to the Licensee,
+  1.5 'Product' means any device, component, work or physical object,
-and shall apply worldwide and without limitation in time. The Licensee
+      whether in finished or intermediate form, arising from the use,
-may assign his licence rights or grant sub-licences.
+      application or processing of Covered Source.
 
-2.3. This Licence does not extend to software, firmware, or code
+  1.6 'Make' means to create or configure something, whether by
-loaded into programmable devices which may be used in conjunction with
+      manufacture, assembly, compiling, loading or applying Covered
-the Documentation, the modified Documentation or with Products, unless
+      Source or another Product or otherwise.
-such software, firmware, or code is explicitly expressed to be subject
-to this Licence. The use of such software, firmware, or code is
-otherwise subject to the applicable licence terms and conditions.
 
-3. Copying, modification, communication to the public and distribution
+  1.7 'Available Component' means any part, sub-assembly, library or
-of the Documentation
+      code which:
 
-3.1. The Licensee shall keep intact all copyright and trademarks
+       a) is licensed to You as Complete Source under a Compatible
-notices, all notices referring to Documentation Location, and all
+          Licence; or
-notices that refer to this Licence and to the disclaimer of warranties
-that are included in the Documentation. He shall include a copy
-thereof in every copy of the Documentation or, as the case may be,
-modified Documentation, that he communicates to the public or
-distributes.
 
-3.2. The Licensee may copy, communicate to the public and distribute
+       b) is available, at the time a Product or the Source containing
-verbatim copies of the Documentation, in any medium, subject to the
+          it is first Conveyed, to You and any other prospective
-requirements specified in section 3.1.
+          licensees
 
-3.3. The Licensee may modify the Documentation or any portion thereof
+            i) as a physical part with sufficient rights and
-provided that upon modification of the Documentation, the Licensee
+               information (including any configuration and
-shall make the modified Documentation available from a Documentation
+               programming files and information about its
-Location such that it can be easily located by an original Licensor
+               characteristics and interfaces) to enable it either to
-once the Licensee communicates to the public or distributes the
+               be Made itself, or to be sourced and used to Make the
-modified Documentation under section 3.4, and, where required by
+               Product; or
-section 4.1, by a recipient of a Product. However, the Licensor shall
+           ii) as part of the normal distribution of a tool used to
-not assert his rights under the foregoing proviso unless or until a
+               design or Make the Product.
-Product is distributed.
 
-3.4. The Licensee may communicate to the public and distribute the
+  1.8 'Complete Source' means the set of all Source necessary to Make
-modified Documentation (thereby in addition to being a Licensee also
+      a Product, in the preferred form for making modifications,
-becoming a Licensor), always provided that he shall:
+      including necessary installation and interfacing information
+      both for the Product, and for any included Available Components.
+      If the format is proprietary, it must also be made available in
+      a format (if the proprietary tool can create it) which is
+      viewable with a tool available to potential licensees and
+      licensed under a licence approved by the Free Software
+      Foundation or the Open Source Initiative. Complete Source need
+      not include the Source of any Available Component, provided that
+      You include in the Complete Source sufficient information to
+      enable a recipient to Make or source and use the Available
+      Component to Make the Product.
 
-a) comply with section 3.1;
+  1.9 'Source Location' means a location where a Licensor has placed
+      Covered Source, and which that Licensor reasonably believes will
+      remain easily accessible for at least three years for anyone to
+      obtain a digital copy.
 
-b) cause the modified Documentation to carry prominent notices stating
+ 1.10 'Notice' means copyright, acknowledgement and trademark notices,
-that the Licensee has modified the Documentation, with the date and
+      Source Location references, modification notices (subsection
-description of the modifications;
+      3.3(b)) and all notices that refer to this Licence and to the
+      disclaimer of warranties that are included in the Covered
+      Source.
 
-c) cause the modified Documentation to carry a new Documentation
+ 1.11 'Licensee' or 'You' means any person exercising rights under
-Location notice if the original Documentation provided for one;
+      this Licence.
 
-d) make available the modified Documentation at the same level of
+ 1.12 'Licensor' means a natural or legal person who creates or
-abstraction as that of the Documentation, in the preferred format for
+      modifies Covered Source. A person may be a Licensee and a
-making modifications to it (e.g. the native format of the CAD tool as
+      Licensor at the same time.
-applicable), and in the event that format is proprietary, in a format
-viewable with a tool licensed under an OSI-approved license if the
-proprietary tool can create it; and
 
-e) license the modified Documentation under the terms and conditions
+ 1.13 'Convey' means to communicate to the public or distribute.
-of this Licence or, where applicable, a later version of this Licence
-as may be issued by CERN.
 
-3.5. The Licence includes a non-exclusive licence to those patents or
-registered designs that are held by, under the control of, or
-sub-licensable by the Licensor, to the extent necessary to make use of
-the rights granted under this Licence. The scope of this section 3.5
-shall be strictly limited to the parts of the Documentation or
-modified Documentation created by the Licensor.
 
-4. Manufacture and distribution of Products
+2 Applicability
 
-4.1. The Licensee may manufacture or distribute Products always
+  2.1 This Licence governs the use, copying, modification, Conveying
-provided that, where such manufacture or distribution requires a
+      of Covered Source and Products, and the Making of Products. By
-licence under this Licence the Licensee provides to each recipient of
+      exercising any right granted under this Licence, You irrevocably
-such Products an easy means of accessing a copy of the Documentation
+      accept these terms and conditions.
-or modified Documentation, as applicable, as set out in section 3.
 
-4.2. The Licensee is invited to inform any Licensor who has indicated
+  2.2 This Licence is granted by the Licensor directly to You, and
-his wish to receive this information about the type, quantity and
+      shall apply worldwide and without limitation in time.
-dates of production of Products the Licensee has (had) manufactured
 
-5. Warranty and liability
+  2.3 You shall not attempt to restrict by contract or otherwise the
+      rights granted under this Licence to other Licensees.
 
-5.1. DISCLAIMER – The Documentation and any modified Documentation are
+  2.4 This Licence is not intended to restrict fair use, fair dealing,
-provided "as is" and any express or implied warranties, including, but
+      or any other similar right.
-not limited to, implied warranties of merchantability, of satisfactory
-quality, non-infringement of third party rights, and fitness for a
-particular purpose or use are disclaimed in respect of the
-Documentation, the modified Documentation or any Product. The Licensor
-makes no representation that the Documentation, modified
-Documentation, or any Product, does or will not infringe any patent,
-copyright, trade secret or other proprietary right. The entire risk as
-to the use, quality, and performance of a Product shall be with the
-Licensee and not the Licensor. This disclaimer of warranty is an
-essential part of this Licence and a condition for the grant of any
-rights granted under this Licence. The Licensee warrants that it does
-not act in a consumer capacity.
 
-5.2. LIMITATION OF LIABILITY – The Licensor shall have no liability
-for direct, indirect, special, incidental, consequential, exemplary,
-punitive or other damages of any character including, without
-limitation, procurement of substitute goods or services, loss of use,
-data or profits, or business interruption, however caused and on any
-theory of contract, warranty, tort (including negligence), product
-liability or otherwise, arising in any way in relation to the
-Documentation, modified Documentation and/or the use, manufacture or
-distribution of a Product, even if advised of the possibility of such
-damages, and the Licensee shall hold the Licensor(s) free and harmless
-from any liability, costs, damages, fees and expenses, including
-claims by third parties, in relation to such use.
 
-6. General
+3 Copying, Modifying and Conveying Covered Source
 
-6.1. Except for the rights explicitly granted hereunder, this Licence
+  3.1 You may copy and Convey verbatim copies of Covered Source, in
-does not imply or represent any transfer or assignment of intellectual
+      any medium, provided You retain all Notices.
-property rights to the Licensee.
 
-6.2. The Licensee shall not use or make reference to any of the names
+  3.2 You may modify Covered Source, other than Notices, provided that
-(including acronyms and abbreviations), images, or logos under which
+      You irrevocably undertake to make that modified Covered Source
-the Licensor is known, save in so far as required to comply with
+      available from a Source Location should You Convey a Product in
-section 3. Any such permitted use or reference shall be factual and
+      circumstances where the recipient does not otherwise receive a
-shall in no event suggest any kind of endorsement by the Licensor or
+      copy of the modified Covered Source. In each case subsection 3.3
-its personnel of the modified Documentation or any Product, or any
+      shall apply.
-kind of implication by the Licensor or its personnel in the
-preparation of the modified Documentation or Product.
 
-6.3. CERN may publish updated versions of this Licence which retain
+      You may only delete Notices if they are no longer applicable to
-the same general provisions as this version, but differ in detail so
+      the corresponding Covered Source as modified by You and You may
-far this is required and reasonable. New versions will be published
+      add additional Notices applicable to Your modifications.
-with a unique version number.
+      Including Covered Source in a larger work is modifying the
+      Covered Source, and the larger work becomes modified Covered
+      Source.
 
-6.4. This Licence shall terminate with immediate effect, upon written
+  3.3 You may Convey modified Covered Source (with the effect that You
-notice and without involvement of a court if the Licensee fails to
+      shall also become a Licensor) provided that You:
-comply with any of its terms and conditions, or if the Licensee
+
-initiates legal action against Licensor in relation to this
+       a) retain Notices as required in subsection 3.2;
-Licence. Section 5 shall continue to apply.
+
+       b) add a Notice to the modified Covered Source stating that You
+          have modified it, with the date and brief description of how
+          You have modified it;
+
+       c) add a Source Location Notice for the modified Covered Source
+          if You Convey in circumstances where the recipient does not
+          otherwise receive a copy of the modified Covered Source; and
+
+       d) license the modified Covered Source under the terms and
+          conditions of this Licence (or, as set out in subsection
+          8.3, a later version, if permitted by the licence of the
+          original Covered Source). Such modified Covered Source must
+          be licensed as a whole, but excluding Available Components
+          contained in it, which remain licensed under their own
+          applicable licences.
+
+
+4 Making and Conveying Products
+
+You may Make Products, and/or Convey them, provided that You either
+provide each recipient with a copy of the Complete Source or ensure
+that each recipient is notified of the Source Location of the Complete
+Source. That Complete Source is Covered Source, and You must
+accordingly satisfy Your obligations set out in subsection 3.3. If
+specified in a Notice, the Product must visibly and securely display
+the Source Location on it or its packaging or documentation in the
+manner specified in that Notice.
+
+
+5 Research and Development
+
+You may Convey Covered Source, modified Covered Source or Products to
+a legal entity carrying out development, testing or quality assurance
+work on Your behalf provided that the work is performed on terms which
+prevent the entity from both using the Source or Products for its own
+internal purposes and Conveying the Source or Products or any
+modifications to them to any person other than You. Any modifications
+made by the entity shall be deemed to be made by You pursuant to
+subsection 3.2.
+
+
+6 DISCLAIMER AND LIABILITY
+
+  6.1 DISCLAIMER OF WARRANTY -- The Covered Source and any Products
+      are provided 'as is' and any express or implied warranties,
+      including, but not limited to, implied warranties of
+      merchantability, of satisfactory quality, non-infringement of
+      third party rights, and fitness for a particular purpose or use
+      are disclaimed in respect of any Source or Product to the
+      maximum extent permitted by law. The Licensor makes no
+      representation that any Source or Product does not or will not
+      infringe any patent, copyright, trade secret or other
+      proprietary right. The entire risk as to the use, quality, and
+      performance of any Source or Product shall be with You and not
+      the Licensor. This disclaimer of warranty is an essential part
+      of this Licence and a condition for the grant of any rights
+      granted under this Licence.
+
+  6.2 EXCLUSION AND LIMITATION OF LIABILITY -- The Licensor shall, to
+      the maximum extent permitted by law, have no liability for
+      direct, indirect, special, incidental, consequential, exemplary,
+      punitive or other damages of any character including, without
+      limitation, procurement of substitute goods or services, loss of
+      use, data or profits, or business interruption, however caused
+      and on any theory of contract, warranty, tort (including
+      negligence), product liability or otherwise, arising in any way
+      in relation to the Covered Source, modified Covered Source
+      and/or the Making or Conveyance of a Product, even if advised of
+      the possibility of such damages, and You shall hold the
+      Licensor(s) free and harmless from any liability, costs,
+      damages, fees and expenses, including claims by third parties,
+      in relation to such use.
+
+
+7 Patents
+
+  7.1 Subject to the terms and conditions of this Licence, each
+      Licensor hereby grants to You a perpetual, worldwide,
+      non-exclusive, no-charge, royalty-free, irrevocable (except as
+      stated in subsections 7.2 and 8.4) patent licence to Make, have
+      Made, use, offer to sell, sell, import, and otherwise transfer
+      the Covered Source and Products, where such licence applies only
+      to those patent claims licensable by such Licensor that are
+      necessarily infringed by exercising rights under the Covered
+      Source as Conveyed by that Licensor.
+
+  7.2 If You institute patent litigation against any entity (including
+      a cross-claim or counterclaim in a lawsuit) alleging that the
+      Covered Source or a Product constitutes direct or contributory
+      patent infringement, or You seek any declaration that a patent
+      licensed to You under this Licence is invalid or unenforceable
+      then any rights granted to You under this Licence shall
+      terminate as of the date such process is initiated.
+
+
+8 General
+
+  8.1 If any provisions of this Licence are or subsequently become
+      invalid or unenforceable for any reason, the remaining
+      provisions shall remain effective.
+
+  8.2 You shall not use any of the name (including acronyms and
+      abbreviations), image, or logo by which the Licensor or CERN is
+      known, except where needed to comply with section 3, or where
+      the use is otherwise allowed by law. Any such permitted use
+      shall be factual and shall not be made so as to suggest any kind
+      of endorsement or implication of involvement by the Licensor or
+      its personnel.
+
+  8.3 CERN may publish updated versions and variants of this Licence
+      which it considers to be in the spirit of this version, but may
+      differ in detail to address new problems or concerns. New
+      versions will be published with a unique version number and a
+      variant identifier specifying the variant. If the Licensor has
+      specified that a given variant applies to the Covered Source
+      without specifying a version, You may treat that Covered Source
+      as being released under any version of the CERN-OHL with that
+      variant. If no variant is specified, the Covered Source shall be
+      treated as being released under CERN-OHL-S. The Licensor may
+      also specify that the Covered Source is subject to a specific
+      version of the CERN-OHL or any later version in which case You
+      may apply this or any later version of CERN-OHL with the same
+      variant identifier published by CERN.
+
+  8.4 This Licence shall terminate with immediate effect if You fail
+      to comply with any of its terms and conditions.
+
+  8.5 However, if You cease all breaches of this Licence, then Your
+      Licence from any Licensor is reinstated unless such Licensor has
+      terminated this Licence by giving You, while You remain in
+      breach, a notice specifying the breach and requiring You to cure
+      it within 30 days, and You have failed to come into compliance
+      in all material respects by the end of the 30 day period. Should
+      You repeat the breach after receipt of a cure notice and
+      subsequent reinstatement, this Licence will terminate
+      immediately and permanently. Section 6 shall continue to apply
+      after any termination.
+
+  8.6 This Licence shall not be enforceable except by a Licensor
+      acting as such, and third party beneficiary rights are
+      specifically excluded.

README.md

@@ -1,80 +1,19 @@
 # The Ploopy Mouse
 
+![The Ploopy Mouse](mouse.jpg)
+
 By some stroke of luck, you've made your way here. The Ploopy Mouse. Your life will never be the same.
 
-If you're looking to get your hands on a QMK-powered mouse, [check out our store link](https://ploopy.co/shop/mouse/)!
+This repository contains all of the design and production files necessary to make a Ploopy Mouse. We've also included some kick-ass documentation in the Wiki on how to get it made, assemble it, and program it.
-
-This repository contains the schematic for the Ploopy Mouse. If you're looking for the firmware that gets shipped with every mouse, check out the [QMK repository](https://github.com/qmk/qmk_firmware).
-
-As of this writing, we are currently shipping every Ploopy Mouse with [QMK Release Version 0.10.48](https://github.com/qmk/qmk_firmware/releases/tag/0.10.48), which we've vetted and guarantee to be stable. If you want, however, you can flash the latest version of QMK onto your device. Although we cannot guarantee that the build will be stable, the developers at QMK do an excellent job ensuring that stable, tested code is in the QMK repository.
 
 What are you waiting for? Your new life awaits.
 
-## QMK Firmware
+## QMK?!
 
-If you're looking for a hex file containing working QMK code with a keymapping compatible with VIA, it's available here. The hex was built with QMK version 0.11.1.
+Kits bought from the [Ploopy store](https://ploopy.co/product-category/mouse/) come with QMK preloaded. Check out the Wiki for instructions on how to load new firmware onto your device. (It's super easy!)
+
+The firmware hex file that ships with all Mice is included in this repository as well, as `ploopyco_mouse_via.hex`. The hex was built with QMK version 0.11.1.
 
 ## Under what license is this released?
 
-Everything in this repository is released under OHL CERN v1.2. Check the LICENSE.md file for full license text.
+Everything in this repository is released under OHL CERN v2-S. Check the LICENSE.md file for full license text.
-
-# How to Flash New Firmware
-
-The Ploopy Mouse is fairly easy to program and reprogram, thanks to the excellent work by all of the developers and maintainers of the [QMK firmware suite](https://github.com/qmk/qmk_firmware). This guide will focus specifically on flashing firmware to the Ploopy Mouse.
-
-## Before you begin
-
-If you have never used QMK before, go through [all of the steps in the QMK guide to set up your environment](https://docs.qmk.fm/#/newbs_getting_started).
-
-QMK was built for keyboards, so you'll see lots of references to code that looks like the following:
-
-`-kb <keyboard>`
-
-Whenever you see that, use the following syntax:
-
-`-kb ploopyco/mouse`
-
-and you'll be fine.
-
-## Building the Ploopy Mouse firmware
-
-With your terminal window open and pointed at your QMK build environment, compile the firmware with the following command:
-
-`qmk compile -kb ploopyco/mouse -km via`
-
-Alternatively, you can invoke the Makefile directly with the following:
-
-`make ploopyco/mouse:via`
-
-If you wish, you can use the default keymap (with `qmk compile -kb ploopyco/mouse -km default` or `make ploopyco/mouse:default`). However, the VIA keymap is particularly interesting because it allows for customization of the mouse's functions without reflashing the firmware, through the use of the convenient [VIA software package](https://github.com/the-via/releases/releases). It's incredibly handy, so definitely check it out.
-
-For more details on building QMK firmware in general, see the [QMK firmware guide](https://docs.qmk.fm/#/newbs_building_firmware).
-
-## Putting the Ploopy Mouse into bootloader mode
-
-Putting the Ploopy Mouse into bootloader mode is very easy.
-
-1. Unplug it from your computer.
-2. Hold the "back" button. This is the button on the side of the mouse that is closer to the bottom of your hand.
-3. While holding the back button, plug the Ploopy Mouse into your computer. If you're using QMK Toolbox, it should show up in the console. If using `dmesg`, it'll show up as an Atmel DFU device.
-
-And that's it. While plugged in this way, the Ploopy Mouse will accept new firmware.
-
-## Flashing the firmware
-
-Use your preferred method of flashing QMK firmware.
-
-- QMK Toolbox has been verified as working.
-- Using `dfu-programmer` from a terminal window has also been verified as working.
-
-For more details, see the [QMK guide](https://docs.qmk.fm/#/newbs_flashing) on flashing firmware.
-
-## And that's it!
-
-Unplug it, replug it in, and you should be good to go!
-
-Happy customizing!
-
-## Acknowledgements
-
-Very special thanks to [drashna](https://github.com/drashna). He wrote a ton of the code that makes this thing go. Check out some of his other projects!

hardware/electronics/PCBs/QMKMouse/QMKMouse.Annotation

@@ -0,0 +1,849 @@
+[DesignatorManager]
+LogicalDesignator0=FB1
+LogicalPartID0=1
+DocumentName0=Connectors.SchDoc
+ChannelName0=USB
+UniqueID0=\BUHOUAJX\ADTZCRYT
+PhysicalDesignator0=USB.FB.1
+PhysicalDesignatorLocked0=0
+LogicalDesignator1=FB5
+LogicalPartID1=1
+DocumentName1=Connectors.SchDoc
+ChannelName1=USB
+UniqueID1=\BUHOUAJX\AYFTHASJ
+PhysicalDesignator1=USB.FB.5
+PhysicalDesignatorLocked1=0
+LogicalDesignator2=C19
+LogicalPartID2=1
+DocumentName2=Connectors.SchDoc
+ChannelName2=USB
+UniqueID2=\BUHOUAJX\CBRFDZBK
+PhysicalDesignator2=USB.C.19
+PhysicalDesignatorLocked2=0
+LogicalDesignator3=J3
+LogicalPartID3=1
+DocumentName3=Connectors.SchDoc
+ChannelName3=USB
+UniqueID3=\BUHOUAJX\IQXFZBUZ
+PhysicalDesignator3=USB.J.3
+PhysicalDesignatorLocked3=0
+LogicalDesignator4=J2
+LogicalPartID4=1
+DocumentName4=Connectors.SchDoc
+ChannelName4=USB
+UniqueID4=\BUHOUAJX\JBDOXEMZ
+PhysicalDesignator4=USB.J.2
+PhysicalDesignatorLocked4=0
+LogicalDesignator5=R8
+LogicalPartID5=1
+DocumentName5=Connectors.SchDoc
+ChannelName5=USB
+UniqueID5=\BUHOUAJX\JOGOVKSL
+PhysicalDesignator5=USB.R.8
+PhysicalDesignatorLocked5=0
+LogicalDesignator6=FB3
+LogicalPartID6=1
+DocumentName6=Connectors.SchDoc
+ChannelName6=USB
+UniqueID6=\BUHOUAJX\JYVRHTWL
+PhysicalDesignator6=USB.FB.3
+PhysicalDesignatorLocked6=0
+LogicalDesignator7=R14
+LogicalPartID7=1
+DocumentName7=Connectors.SchDoc
+ChannelName7=USB
+UniqueID7=\BUHOUAJX\LROFNDMG
+PhysicalDesignator7=USB.R.14
+PhysicalDesignatorLocked7=0
+LogicalDesignator8=R9
+LogicalPartID8=1
+DocumentName8=Connectors.SchDoc
+ChannelName8=USB
+UniqueID8=\BUHOUAJX\MDYBPBKG
+PhysicalDesignator8=USB.R.9
+PhysicalDesignatorLocked8=0
+LogicalDesignator9=Z1
+LogicalPartID9=1
+DocumentName9=Connectors.SchDoc
+ChannelName9=USB
+UniqueID9=\BUHOUAJX\MHNMVSHF
+PhysicalDesignator9=USB.Z.1
+PhysicalDesignatorLocked9=0
+LogicalDesignator10=R13
+LogicalPartID10=1
+DocumentName10=Connectors.SchDoc
+ChannelName10=USB
+UniqueID10=\BUHOUAJX\PAHZCWJS
+PhysicalDesignator10=USB.R.13
+PhysicalDesignatorLocked10=0
+LogicalDesignator11=R12
+LogicalPartID11=1
+DocumentName11=Connectors.SchDoc
+ChannelName11=USB
+UniqueID11=\BUHOUAJX\PBGBQRSQ
+PhysicalDesignator11=USB.R.12
+PhysicalDesignatorLocked11=0
+LogicalDesignator12=R10
+LogicalPartID12=1
+DocumentName12=Connectors.SchDoc
+ChannelName12=USB
+UniqueID12=\BUHOUAJX\PMRZUBWX
+PhysicalDesignator12=USB.R.10
+PhysicalDesignatorLocked12=0
+LogicalDesignator13=FB4
+LogicalPartID13=1
+DocumentName13=Connectors.SchDoc
+ChannelName13=USB
+UniqueID13=\BUHOUAJX\PMUPTWCF
+PhysicalDesignator13=USB.FB.4
+PhysicalDesignatorLocked13=0
+LogicalDesignator14=R7
+LogicalPartID14=1
+DocumentName14=Connectors.SchDoc
+ChannelName14=USB
+UniqueID14=\BUHOUAJX\RPZKDCHQ
+PhysicalDesignator14=USB.R.7
+PhysicalDesignatorLocked14=0
+LogicalDesignator15=R15
+LogicalPartID15=1
+DocumentName15=Connectors.SchDoc
+ChannelName15=USB
+UniqueID15=\BUHOUAJX\SCQKYIQA
+PhysicalDesignator15=USB.R.15
+PhysicalDesignatorLocked15=0
+LogicalDesignator16=R6
+LogicalPartID16=1
+DocumentName16=Connectors.SchDoc
+ChannelName16=USB
+UniqueID16=\BUHOUAJX\STHGMNKH
+PhysicalDesignator16=USB.R.6
+PhysicalDesignatorLocked16=0
+LogicalDesignator17=FB2
+LogicalPartID17=1
+DocumentName17=Connectors.SchDoc
+ChannelName17=USB
+UniqueID17=\BUHOUAJX\UBEFDYPN
+PhysicalDesignator17=USB.FB.2
+PhysicalDesignatorLocked17=0
+LogicalDesignator18=R11
+LogicalPartID18=1
+DocumentName18=Connectors.SchDoc
+ChannelName18=USB
+UniqueID18=\BUHOUAJX\WDJHLDKC
+PhysicalDesignator18=USB.R.11
+PhysicalDesignatorLocked18=0
+LogicalDesignator19=R17
+LogicalPartID19=1
+DocumentName19=LEDs.SchDoc
+ChannelName19=LED
+UniqueID19=\CZCSAXXD\AJQSHFAG
+PhysicalDesignator19=LED.R.17
+PhysicalDesignatorLocked19=0
+LogicalDesignator20=C24
+LogicalPartID20=1
+DocumentName20=LEDs.SchDoc
+ChannelName20=LED
+UniqueID20=\CZCSAXXD\CRXNLZWT
+PhysicalDesignator20=LED.C.24
+PhysicalDesignatorLocked20=0
+LogicalDesignator21=C21
+LogicalPartID21=1
+DocumentName21=LEDs.SchDoc
+ChannelName21=LED
+UniqueID21=\CZCSAXXD\FHXCBEIQ
+PhysicalDesignator21=LED.C.21
+PhysicalDesignatorLocked21=0
+LogicalDesignator22=D5
+LogicalPartID22=1
+DocumentName22=LEDs.SchDoc
+ChannelName22=LED
+UniqueID22=\CZCSAXXD\GMDBOUVL
+PhysicalDesignator22=LED.D.5
+PhysicalDesignatorLocked22=0
+LogicalDesignator23=C25
+LogicalPartID23=1
+DocumentName23=LEDs.SchDoc
+ChannelName23=LED
+UniqueID23=\CZCSAXXD\HLGSCDJZ
+PhysicalDesignator23=LED.C.25
+PhysicalDesignatorLocked23=0
+LogicalDesignator24=C27
+LogicalPartID24=1
+DocumentName24=LEDs.SchDoc
+ChannelName24=LED
+UniqueID24=\CZCSAXXD\HNCRDJBO
+PhysicalDesignator24=LED.C.27
+PhysicalDesignatorLocked24=0
+LogicalDesignator25=D2
+LogicalPartID25=1
+DocumentName25=LEDs.SchDoc
+ChannelName25=LED
+UniqueID25=\CZCSAXXD\HOJXDUZU
+PhysicalDesignator25=LED.D.2
+PhysicalDesignatorLocked25=0
+LogicalDesignator26=D7
+LogicalPartID26=1
+DocumentName26=LEDs.SchDoc
+ChannelName26=LED
+UniqueID26=\CZCSAXXD\IIQQBWDQ
+PhysicalDesignator26=LED.D.7
+PhysicalDesignatorLocked26=0
+LogicalDesignator27=C20
+LogicalPartID27=1
+DocumentName27=LEDs.SchDoc
+ChannelName27=LED
+UniqueID27=\CZCSAXXD\KWWCMSIR
+PhysicalDesignator27=LED.C.20
+PhysicalDesignatorLocked27=0
+LogicalDesignator28=C26
+LogicalPartID28=1
+DocumentName28=LEDs.SchDoc
+ChannelName28=LED
+UniqueID28=\CZCSAXXD\MYYIZFGP
+PhysicalDesignator28=LED.C.26
+PhysicalDesignatorLocked28=0
+LogicalDesignator29=R19
+LogicalPartID29=1
+DocumentName29=LEDs.SchDoc
+ChannelName29=LED
+UniqueID29=\CZCSAXXD\NTLUONXC
+PhysicalDesignator29=LED.R.19
+PhysicalDesignatorLocked29=0
+LogicalDesignator30=D6
+LogicalPartID30=1
+DocumentName30=LEDs.SchDoc
+ChannelName30=LED
+UniqueID30=\CZCSAXXD\PZXUVQAV
+PhysicalDesignator30=LED.D.6
+PhysicalDesignatorLocked30=0
+LogicalDesignator31=D3
+LogicalPartID31=1
+DocumentName31=LEDs.SchDoc
+ChannelName31=LED
+UniqueID31=\CZCSAXXD\RAISPFJW
+PhysicalDesignator31=LED.D.3
+PhysicalDesignatorLocked31=0
+LogicalDesignator32=D4
+LogicalPartID32=1
+DocumentName32=LEDs.SchDoc
+ChannelName32=LED
+UniqueID32=\CZCSAXXD\RMDYCEXA
+PhysicalDesignator32=LED.D.4
+PhysicalDesignatorLocked32=0
+LogicalDesignator33=R16
+LogicalPartID33=1
+DocumentName33=LEDs.SchDoc
+ChannelName33=LED
+UniqueID33=\CZCSAXXD\RPBQVFVI
+PhysicalDesignator33=LED.R.16
+PhysicalDesignatorLocked33=0
+LogicalDesignator34=R18
+LogicalPartID34=1
+DocumentName34=LEDs.SchDoc
+ChannelName34=LED
+UniqueID34=\CZCSAXXD\UWPAOXAG
+PhysicalDesignator34=LED.R.18
+PhysicalDesignatorLocked34=0
+LogicalDesignator35=C23
+LogicalPartID35=1
+DocumentName35=LEDs.SchDoc
+ChannelName35=LED
+UniqueID35=\CZCSAXXD\VFTDASFT
+PhysicalDesignator35=LED.C.23
+PhysicalDesignatorLocked35=0
+LogicalDesignator36=D8
+LogicalPartID36=1
+DocumentName36=LEDs.SchDoc
+ChannelName36=LED
+UniqueID36=\CZCSAXXD\VNLDMAZW
+PhysicalDesignator36=LED.D.8
+PhysicalDesignatorLocked36=0
+LogicalDesignator37=D1
+LogicalPartID37=1
+DocumentName37=LEDs.SchDoc
+ChannelName37=LED
+UniqueID37=\CZCSAXXD\WDATZMUA
+PhysicalDesignator37=LED.D.1
+PhysicalDesignatorLocked37=0
+LogicalDesignator38=C28
+LogicalPartID38=1
+DocumentName38=LEDs.SchDoc
+ChannelName38=LED
+UniqueID38=\CZCSAXXD\YOGPHNEI
+PhysicalDesignator38=LED.C.28
+PhysicalDesignatorLocked38=0
+LogicalDesignator39=Qt1
+LogicalPartID39=1
+DocumentName39=ScrollWheel.SchDoc
+ChannelName39=SCW
+UniqueID39=\IHCTWOXY\AYUKCNJX
+PhysicalDesignator39=SCW.Qt.1
+PhysicalDesignatorLocked39=0
+LogicalDesignator40=D12
+LogicalPartID40=1
+DocumentName40=ScrollWheel.SchDoc
+ChannelName40=SCW
+UniqueID40=\IHCTWOXY\CJXICGDH
+PhysicalDesignator40=SCW.D.12
+PhysicalDesignatorLocked40=0
+LogicalDesignator41=D11
+LogicalPartID41=1
+DocumentName41=ScrollWheel.SchDoc
+ChannelName41=SCW
+UniqueID41=\IHCTWOXY\IBLVDUZV
+PhysicalDesignator41=SCW.D.11
+PhysicalDesignatorLocked41=0
+LogicalDesignator42=R1
+LogicalPartID42=1
+DocumentName42=ScrollWheel.SchDoc
+ChannelName42=SCW
+UniqueID42=\IHCTWOXY\KRKJNZNE
+PhysicalDesignator42=SCW.R.1
+PhysicalDesignatorLocked42=0
+LogicalDesignator43=R4
+LogicalPartID43=1
+DocumentName43=ScrollWheel.SchDoc
+ChannelName43=SCW
+UniqueID43=\IHCTWOXY\MMUBUARA
+PhysicalDesignator43=SCW.R.4
+PhysicalDesignatorLocked43=0
+LogicalDesignator44=R2
+LogicalPartID44=1
+DocumentName44=ScrollWheel.SchDoc
+ChannelName44=SCW
+UniqueID44=\IHCTWOXY\NTDOKBGF
+PhysicalDesignator44=SCW.R.2
+PhysicalDesignatorLocked44=0
+LogicalDesignator45=R3
+LogicalPartID45=1
+DocumentName45=ScrollWheel.SchDoc
+ChannelName45=SCW
+UniqueID45=\IHCTWOXY\YSONJUDH
+PhysicalDesignator45=SCW.R.3
+PhysicalDesignatorLocked45=0
+LogicalDesignator46=Qt2
+LogicalPartID46=1
+DocumentName46=ScrollWheel.SchDoc
+ChannelName46=SCW
+UniqueID46=\IHCTWOXY\ZQXOKDHF
+PhysicalDesignator46=SCW.Qt.2
+PhysicalDesignatorLocked46=0
+LogicalDesignator47=C4
+LogicalPartID47=1
+DocumentName47=MCU.SchDoc
+ChannelName47=MCU
+UniqueID47=\KPFJTNEE\CDRWCHII
+PhysicalDesignator47=MCU.C.4
+PhysicalDesignatorLocked47=0
+LogicalDesignator48=Y1
+LogicalPartID48=1
+DocumentName48=MCU.SchDoc
+ChannelName48=MCU
+UniqueID48=\KPFJTNEE\EHCBTQFL
+PhysicalDesignator48=MCU.Y.1
+PhysicalDesignatorLocked48=0
+LogicalDesignator49=J4
+LogicalPartID49=1
+DocumentName49=MCU.SchDoc
+ChannelName49=MCU
+UniqueID49=\KPFJTNEE\FIVKHMRK
+PhysicalDesignator49=MCU.J.4
+PhysicalDesignatorLocked49=0
+LogicalDesignator50=R20
+LogicalPartID50=1
+DocumentName50=MCU.SchDoc
+ChannelName50=MCU
+UniqueID50=\KPFJTNEE\GWDSNYZR
+PhysicalDesignator50=MCU.R.20
+PhysicalDesignatorLocked50=0
+LogicalDesignator51=C8
+LogicalPartID51=1
+DocumentName51=MCU.SchDoc
+ChannelName51=MCU
+UniqueID51=\KPFJTNEE\JEPQHKSW
+PhysicalDesignator51=MCU.C.8
+PhysicalDesignatorLocked51=0
+LogicalDesignator52=J1
+LogicalPartID52=1
+DocumentName52=MCU.SchDoc
+ChannelName52=MCU
+UniqueID52=\KPFJTNEE\KEAJHBCA
+PhysicalDesignator52=MCU.J.1
+PhysicalDesignatorLocked52=0
+LogicalDesignator53=C1
+LogicalPartID53=1
+DocumentName53=MCU.SchDoc
+ChannelName53=MCU
+UniqueID53=\KPFJTNEE\PBTHCPCM
+PhysicalDesignator53=MCU.C.1
+PhysicalDesignatorLocked53=0
+LogicalDesignator54=C9
+LogicalPartID54=1
+DocumentName54=MCU.SchDoc
+ChannelName54=MCU
+UniqueID54=\KPFJTNEE\QTEECFTU
+PhysicalDesignator54=MCU.C.9
+PhysicalDesignatorLocked54=0
+LogicalDesignator55=C22
+LogicalPartID55=1
+DocumentName55=MCU.SchDoc
+ChannelName55=MCU
+UniqueID55=\KPFJTNEE\URIXVBQR
+PhysicalDesignator55=MCU.C.22
+PhysicalDesignatorLocked55=0
+LogicalDesignator56=C6
+LogicalPartID56=1
+DocumentName56=MCU.SchDoc
+ChannelName56=MCU
+UniqueID56=\KPFJTNEE\VFZVKQXG
+PhysicalDesignator56=MCU.C.6
+PhysicalDesignatorLocked56=0
+LogicalDesignator57=R1
+LogicalPartID57=1
+DocumentName57=MCU.SchDoc
+ChannelName57=MCU
+UniqueID57=\KPFJTNEE\XGVKWGIX
+PhysicalDesignator57=MCU.R.1
+PhysicalDesignatorLocked57=0
+LogicalDesignator58=C5
+LogicalPartID58=1
+DocumentName58=MCU.SchDoc
+ChannelName58=MCU
+UniqueID58=\KPFJTNEE\XOAKPPGO
+PhysicalDesignator58=MCU.C.5
+PhysicalDesignatorLocked58=0
+LogicalDesignator59=C7
+LogicalPartID59=1
+DocumentName59=MCU.SchDoc
+ChannelName59=MCU
+UniqueID59=\KPFJTNEE\YVZCGTGE
+PhysicalDesignator59=MCU.C.7
+PhysicalDesignatorLocked59=0
+LogicalDesignator60=U1
+LogicalPartID60=1
+DocumentName60=MCU.SchDoc
+ChannelName60=MCU
+UniqueID60=\KPFJTNEE\ZUIDGLUG
+PhysicalDesignator60=MCU.U.1
+PhysicalDesignatorLocked60=0
+LogicalDesignator61=SP25
+LogicalPartID61=1
+DocumentName61=Mechanical.SchDoc
+ChannelName61=MCH
+UniqueID61=\NDZGVAIK\AVICHPDL
+PhysicalDesignator61=MCH.SP.25
+PhysicalDesignatorLocked61=0
+LogicalDesignator62=SP15
+LogicalPartID62=1
+DocumentName62=Mechanical.SchDoc
+ChannelName62=MCH
+UniqueID62=\NDZGVAIK\BFVKZHHJ
+PhysicalDesignator62=MCH.SP.15
+PhysicalDesignatorLocked62=0
+LogicalDesignator63=SP28
+LogicalPartID63=1
+DocumentName63=Mechanical.SchDoc
+ChannelName63=MCH
+UniqueID63=\NDZGVAIK\BIISLKGE
+PhysicalDesignator63=MCH.SP.28
+PhysicalDesignatorLocked63=0
+LogicalDesignator64=SP24
+LogicalPartID64=1
+DocumentName64=Mechanical.SchDoc
+ChannelName64=MCH
+UniqueID64=\NDZGVAIK\DDQARXEF
+PhysicalDesignator64=MCH.SP.24
+PhysicalDesignatorLocked64=0
+LogicalDesignator65=SP10
+LogicalPartID65=1
+DocumentName65=Mechanical.SchDoc
+ChannelName65=MCH
+UniqueID65=\NDZGVAIK\FKWTUBKU
+PhysicalDesignator65=MCH.SP.10
+PhysicalDesignatorLocked65=0
+LogicalDesignator66=SP21
+LogicalPartID66=1
+DocumentName66=Mechanical.SchDoc
+ChannelName66=MCH
+UniqueID66=\NDZGVAIK\FLUSARHN
+PhysicalDesignator66=MCH.SP.21
+PhysicalDesignatorLocked66=0
+LogicalDesignator67=SP16
+LogicalPartID67=1
+DocumentName67=Mechanical.SchDoc
+ChannelName67=MCH
+UniqueID67=\NDZGVAIK\GNQUHWYL
+PhysicalDesignator67=MCH.SP.16
+PhysicalDesignatorLocked67=0
+LogicalDesignator68=SP27
+LogicalPartID68=1
+DocumentName68=Mechanical.SchDoc
+ChannelName68=MCH
+UniqueID68=\NDZGVAIK\HPTVXXGH
+PhysicalDesignator68=MCH.SP.27
+PhysicalDesignatorLocked68=0
+LogicalDesignator69=SP20
+LogicalPartID69=1
+DocumentName69=Mechanical.SchDoc
+ChannelName69=MCH
+UniqueID69=\NDZGVAIK\IBTNRCCL
+PhysicalDesignator69=MCH.SP.20
+PhysicalDesignatorLocked69=0
+LogicalDesignator70=SP6
+LogicalPartID70=1
+DocumentName70=Mechanical.SchDoc
+ChannelName70=MCH
+UniqueID70=\NDZGVAIK\IFGOPBUK
+PhysicalDesignator70=MCH.SP.6
+PhysicalDesignatorLocked70=0
+LogicalDesignator71=SP1
+LogicalPartID71=1
+DocumentName71=Mechanical.SchDoc
+ChannelName71=MCH
+UniqueID71=\NDZGVAIK\INZVSJTS
+PhysicalDesignator71=MCH.SP.1
+PhysicalDesignatorLocked71=0
+LogicalDesignator72=FID2
+LogicalPartID72=1
+DocumentName72=Mechanical.SchDoc
+ChannelName72=MCH
+UniqueID72=\NDZGVAIK\KSLNYSAO
+PhysicalDesignator72=MCH.FID.2
+PhysicalDesignatorLocked72=0
+LogicalDesignator73=SP3
+LogicalPartID73=1
+DocumentName73=Mechanical.SchDoc
+ChannelName73=MCH
+UniqueID73=\NDZGVAIK\LIUKLTIK
+PhysicalDesignator73=MCH.SP.3
+PhysicalDesignatorLocked73=0
+LogicalDesignator74=SP8
+LogicalPartID74=1
+DocumentName74=Mechanical.SchDoc
+ChannelName74=MCH
+UniqueID74=\NDZGVAIK\LJZGWUXO
+PhysicalDesignator74=MCH.SP.8
+PhysicalDesignatorLocked74=0
+LogicalDesignator75=SP22
+LogicalPartID75=1
+DocumentName75=Mechanical.SchDoc
+ChannelName75=MCH
+UniqueID75=\NDZGVAIK\LYEACBZV
+PhysicalDesignator75=MCH.SP.22
+PhysicalDesignatorLocked75=0
+LogicalDesignator76=SP14
+LogicalPartID76=1
+DocumentName76=Mechanical.SchDoc
+ChannelName76=MCH
+UniqueID76=\NDZGVAIK\MHHAFIHB
+PhysicalDesignator76=MCH.SP.14
+PhysicalDesignatorLocked76=0
+LogicalDesignator77=LOGO2
+LogicalPartID77=1
+DocumentName77=Mechanical.SchDoc
+ChannelName77=MCH
+UniqueID77=\NDZGVAIK\OIYPVAAS
+PhysicalDesignator77=MCH.LOGO.2
+PhysicalDesignatorLocked77=0
+LogicalDesignator78=SP23
+LogicalPartID78=1
+DocumentName78=Mechanical.SchDoc
+ChannelName78=MCH
+UniqueID78=\NDZGVAIK\RRWVFTRA
+PhysicalDesignator78=MCH.SP.23
+PhysicalDesignatorLocked78=0
+LogicalDesignator79=SP17
+LogicalPartID79=1
+DocumentName79=Mechanical.SchDoc
+ChannelName79=MCH
+UniqueID79=\NDZGVAIK\SBSFUFPD
+PhysicalDesignator79=MCH.SP.17
+PhysicalDesignatorLocked79=0
+LogicalDesignator80=SP7
+LogicalPartID80=1
+DocumentName80=Mechanical.SchDoc
+ChannelName80=MCH
+UniqueID80=\NDZGVAIK\SDHBQBAQ
+PhysicalDesignator80=MCH.SP.7
+PhysicalDesignatorLocked80=0
+LogicalDesignator81=SP9
+LogicalPartID81=1
+DocumentName81=Mechanical.SchDoc
+ChannelName81=MCH
+UniqueID81=\NDZGVAIK\TMPFZNKR
+PhysicalDesignator81=MCH.SP.9
+PhysicalDesignatorLocked81=0
+LogicalDesignator82=SP2
+LogicalPartID82=1
+DocumentName82=Mechanical.SchDoc
+ChannelName82=MCH
+UniqueID82=\NDZGVAIK\TTJIHRXT
+PhysicalDesignator82=MCH.SP.2
+PhysicalDesignatorLocked82=0
+LogicalDesignator83=SP18
+LogicalPartID83=1
+DocumentName83=Mechanical.SchDoc
+ChannelName83=MCH
+UniqueID83=\NDZGVAIK\UAEXLLRB
+PhysicalDesignator83=MCH.SP.18
+PhysicalDesignatorLocked83=0
+LogicalDesignator84=SP19
+LogicalPartID84=1
+DocumentName84=Mechanical.SchDoc
+ChannelName84=MCH
+UniqueID84=\NDZGVAIK\VBMSLOWX
+PhysicalDesignator84=MCH.SP.19
+PhysicalDesignatorLocked84=0
+LogicalDesignator85=SP4
+LogicalPartID85=1
+DocumentName85=Mechanical.SchDoc
+ChannelName85=MCH
+UniqueID85=\NDZGVAIK\VEBBLAEB
+PhysicalDesignator85=MCH.SP.4
+PhysicalDesignatorLocked85=0
+LogicalDesignator86=SP11
+LogicalPartID86=1
+DocumentName86=Mechanical.SchDoc
+ChannelName86=MCH
+UniqueID86=\NDZGVAIK\WYKRGGND
+PhysicalDesignator86=MCH.SP.11
+PhysicalDesignatorLocked86=0
+LogicalDesignator87=FID1
+LogicalPartID87=1
+DocumentName87=Mechanical.SchDoc
+ChannelName87=MCH
+UniqueID87=\NDZGVAIK\XWPAMOLE
+PhysicalDesignator87=MCH.FID.1
+PhysicalDesignatorLocked87=0
+LogicalDesignator88=LOGO1
+LogicalPartID88=1
+DocumentName88=Mechanical.SchDoc
+ChannelName88=MCH
+UniqueID88=\NDZGVAIK\YOYYDCWU
+PhysicalDesignator88=MCH.LOGO.1
+PhysicalDesignatorLocked88=0
+LogicalDesignator89=SP13
+LogicalPartID89=1
+DocumentName89=Mechanical.SchDoc
+ChannelName89=MCH
+UniqueID89=\NDZGVAIK\ZBGPGWHO
+PhysicalDesignator89=MCH.SP.13
+PhysicalDesignatorLocked89=0
+LogicalDesignator90=SP26
+LogicalPartID90=1
+DocumentName90=Mechanical.SchDoc
+ChannelName90=MCH
+UniqueID90=\NDZGVAIK\ZDEYHEHB
+PhysicalDesignator90=MCH.SP.26
+PhysicalDesignatorLocked90=0
+LogicalDesignator91=SP5
+LogicalPartID91=1
+DocumentName91=Mechanical.SchDoc
+ChannelName91=MCH
+UniqueID91=\NDZGVAIK\ZKSNHGPW
+PhysicalDesignator91=MCH.SP.5
+PhysicalDesignatorLocked91=0
+LogicalDesignator92=SP12
+LogicalPartID92=1
+DocumentName92=Mechanical.SchDoc
+ChannelName92=MCH
+UniqueID92=\NDZGVAIK\ZMSRZENN
+PhysicalDesignator92=MCH.SP.12
+PhysicalDesignatorLocked92=0
+LogicalDesignator93=R5
+LogicalPartID93=1
+DocumentName93=MouseSensor.SchDoc
+ChannelName93=MOS
+UniqueID93=\ROEMJLXA\ENFZHOAZ
+PhysicalDesignator93=MOS.R.5
+PhysicalDesignatorLocked93=0
+LogicalDesignator94=U2
+LogicalPartID94=1
+DocumentName94=MouseSensor.SchDoc
+ChannelName94=MOS
+UniqueID94=\ROEMJLXA\HFEWNQSU
+PhysicalDesignator94=MOS.U.2
+PhysicalDesignatorLocked94=0
+LogicalDesignator95=R4
+LogicalPartID95=1
+DocumentName95=MouseSensor.SchDoc
+ChannelName95=MOS
+UniqueID95=\ROEMJLXA\ICNLIYTT
+PhysicalDesignator95=MOS.R.4
+PhysicalDesignatorLocked95=0
+LogicalDesignator96=R3
+LogicalPartID96=1
+DocumentName96=MouseSensor.SchDoc
+ChannelName96=MOS
+UniqueID96=\ROEMJLXA\JJIVMNRR
+PhysicalDesignator96=MOS.R.3
+PhysicalDesignatorLocked96=0
+LogicalDesignator97=C11
+LogicalPartID97=1
+DocumentName97=MouseSensor.SchDoc
+ChannelName97=MOS
+UniqueID97=\ROEMJLXA\TWPPBRIS
+PhysicalDesignator97=MOS.C.11
+PhysicalDesignatorLocked97=0
+LogicalDesignator98=C10
+LogicalPartID98=1
+DocumentName98=MouseSensor.SchDoc
+ChannelName98=MOS
+UniqueID98=\ROEMJLXA\VJPNHDND
+PhysicalDesignator98=MOS.C.10
+PhysicalDesignatorLocked98=0
+LogicalDesignator99=U3
+LogicalPartID99=1
+DocumentName99=Regulators.SchDoc
+ChannelName99=REG
+UniqueID99=\RXDORYXU\CBXRONVV
+PhysicalDesignator99=REG.U.3
+PhysicalDesignatorLocked99=0
+LogicalDesignator100=C12
+LogicalPartID100=1
+DocumentName100=Regulators.SchDoc
+ChannelName100=REG
+UniqueID100=\RXDORYXU\KKMFXSHM
+PhysicalDesignator100=REG.C.12
+PhysicalDesignatorLocked100=0
+LogicalDesignator101=C18
+LogicalPartID101=1
+DocumentName101=Regulators.SchDoc
+ChannelName101=REG
+UniqueID101=\RXDORYXU\MOTSNROT
+PhysicalDesignator101=REG.C.18
+PhysicalDesignatorLocked101=0
+LogicalDesignator102=U4
+LogicalPartID102=1
+DocumentName102=Regulators.SchDoc
+ChannelName102=REG
+UniqueID102=\RXDORYXU\NVKEUAQZ
+PhysicalDesignator102=REG.U.4
+PhysicalDesignatorLocked102=0
+LogicalDesignator103=C16
+LogicalPartID103=1
+DocumentName103=Regulators.SchDoc
+ChannelName103=REG
+UniqueID103=\RXDORYXU\NZHGOTXS
+PhysicalDesignator103=REG.C.16
+PhysicalDesignatorLocked103=0
+LogicalDesignator104=C15
+LogicalPartID104=1
+DocumentName104=Regulators.SchDoc
+ChannelName104=REG
+UniqueID104=\RXDORYXU\OKJKRDGI
+PhysicalDesignator104=REG.C.15
+PhysicalDesignatorLocked104=0
+LogicalDesignator105=C17
+LogicalPartID105=1
+DocumentName105=Regulators.SchDoc
+ChannelName105=REG
+UniqueID105=\RXDORYXU\TXBZUARI
+PhysicalDesignator105=REG.C.17
+PhysicalDesignatorLocked105=0
+LogicalDesignator106=C14
+LogicalPartID106=1
+DocumentName106=Regulators.SchDoc
+ChannelName106=REG
+UniqueID106=\RXDORYXU\WJOPFPMV
+PhysicalDesignator106=REG.C.14
+PhysicalDesignatorLocked106=0
+LogicalDesignator107=C13
+LogicalPartID107=1
+DocumentName107=Regulators.SchDoc
+ChannelName107=REG
+UniqueID107=\RXDORYXU\YVQQFEPF
+PhysicalDesignator107=REG.C.13
+PhysicalDesignatorLocked107=0
+LogicalDesignator108=SW2
+LogicalPartID108=1
+DocumentName108=Buttons.SchDoc
+ChannelName108=BTN
+UniqueID108=\TZTSNUYN\CWCXPLAV
+PhysicalDesignator108=LBS.SW.2
+PhysicalDesignatorLocked108=0
+LogicalDesignator109=SW1
+LogicalPartID109=1
+DocumentName109=Buttons.SchDoc
+ChannelName109=BTN
+UniqueID109=\TZTSNUYN\DLPLGRTH
+PhysicalDesignator109=LBS.SW.1
+PhysicalDesignatorLocked109=0
+LogicalDesignator110=SW4
+LogicalPartID110=1
+DocumentName110=Buttons.SchDoc
+ChannelName110=BTN
+UniqueID110=\TZTSNUYN\DTNKUMOP
+PhysicalDesignator110=BTN.SW.4
+PhysicalDesignatorLocked110=0
+LogicalDesignator111=SW3
+LogicalPartID111=1
+DocumentName111=Buttons.SchDoc
+ChannelName111=BTN
+UniqueID111=\TZTSNUYN\GHOCZVFR
+PhysicalDesignator111=BTN.SW.3
+PhysicalDesignatorLocked111=0
+LogicalDesignator112=SW6
+LogicalPartID112=1
+DocumentName112=Buttons.SchDoc
+ChannelName112=BTN
+UniqueID112=\TZTSNUYN\KZLKUEKP
+PhysicalDesignator112=BTN.SW.6
+PhysicalDesignatorLocked112=0
+LogicalDesignator113=SW7
+LogicalPartID113=1
+DocumentName113=Buttons.SchDoc
+ChannelName113=BTN
+UniqueID113=\TZTSNUYN\NGMHELFS
+PhysicalDesignator113=BTN.SW.7
+PhysicalDesignatorLocked113=0
+LogicalDesignator114=SW8
+LogicalPartID114=1
+DocumentName114=Buttons.SchDoc
+ChannelName114=BTN
+UniqueID114=\TZTSNUYN\RECPSKBK
+PhysicalDesignator114=BTN.SW.8
+PhysicalDesignatorLocked114=0
+LogicalDesignator115=SW5
+LogicalPartID115=1
+DocumentName115=Buttons.SchDoc
+ChannelName115=BTN
+UniqueID115=\TZTSNUYN\UYSRBSIL
+PhysicalDesignator115=BTN.SW.5
+PhysicalDesignatorLocked115=0
+
+[SheetNumberManager]
+SheetNumberOrder=Sheets Hierarchical Structure - Depth First
+SheetNumberMethod=Increasing
+DocumentName0=Buttons.SchDoc
+UniqueIDPath0=\TZTSNUYN
+SheetNumber0=2
+DocumentName1=Connectors.SchDoc
+UniqueIDPath1=\BUHOUAJX
+SheetNumber1=10
+DocumentName2=LEDs.SchDoc
+UniqueIDPath2=\CZCSAXXD
+SheetNumber2=3
+DocumentName3=MCU.SchDoc
+UniqueIDPath3=\KPFJTNEE
+SheetNumber3=5
+DocumentName4=Mechanical.SchDoc
+UniqueIDPath4=\NDZGVAIK
+SheetNumber4=4
+DocumentName5=MouseSensor.SchDoc
+UniqueIDPath5=\ROEMJLXA
+SheetNumber5=6
+DocumentName6=QMKMouse.SchDoc
+UniqueIDPath6=
+SheetNumber6=1
+DocumentName7=Regulators.SchDoc
+UniqueIDPath7=\RXDORYXU
+SheetNumber7=7
+DocumentName8=ResetButton.SchDoc
+UniqueIDPath8=\NZOCRPGT
+SheetNumber8=8
+DocumentName9=ScrollWheel.SchDoc
+UniqueIDPath9=\IHCTWOXY
+SheetNumber9=9
+
+

hardware/electronics/PCBs/QMKMouse/QMKMouse.PrjPCBStructure

@@ -0,0 +1,9 @@
+Record=TopLevelDocument|FileName=QMKMouse.SchDoc|SheetNumber=1
+Record=SheetSymbol|SourceDocument=QMKMouse.SchDoc|Designator=BTN|SchDesignator=BTN|FileName=Buttons.SchDoc|SheetNumber=2|SymbolType=Normal|RawFileName=Buttons.SchDoc|DesignItemId= |SourceLibraryName= |ObjectKind=Sheet Symbol|RevisionGUID= |ItemGUID= |VaultGUID= 
+Record=SheetSymbol|SourceDocument=QMKMouse.SchDoc|Designator=LED|SchDesignator=LED|FileName=LEDs.SchDoc|SheetNumber=4|SymbolType=Normal|RawFileName=LEDs.SchDoc|DesignItemId= |SourceLibraryName= |ObjectKind=Sheet Symbol|RevisionGUID= |ItemGUID= |VaultGUID= 
+Record=SheetSymbol|SourceDocument=QMKMouse.SchDoc|Designator=MCH|SchDesignator=MCH|FileName=Mechanical.SchDoc|SheetNumber=6|SymbolType=Normal|RawFileName=Mechanical.SchDoc|DesignItemId= |SourceLibraryName= |ObjectKind=Sheet Symbol|RevisionGUID= |ItemGUID= |VaultGUID= 
+Record=SheetSymbol|SourceDocument=QMKMouse.SchDoc|Designator=MCU|SchDesignator=MCU|FileName=MCU.SchDoc|SheetNumber=5|SymbolType=Normal|RawFileName=MCU.SchDoc|DesignItemId= |SourceLibraryName= |ObjectKind=Sheet Symbol|RevisionGUID= |ItemGUID= |VaultGUID= 
+Record=SheetSymbol|SourceDocument=QMKMouse.SchDoc|Designator=MOS|SchDesignator=MOS|FileName=MouseSensor.SchDoc|SheetNumber=7|SymbolType=Normal|RawFileName=MouseSensor.SchDoc|DesignItemId= |SourceLibraryName= |ObjectKind=Sheet Symbol|RevisionGUID= |ItemGUID= |VaultGUID= 
+Record=SheetSymbol|SourceDocument=QMKMouse.SchDoc|Designator=REG|SchDesignator=REG|FileName=Regulators.SchDoc|SheetNumber=8|SymbolType=Normal|RawFileName=Regulators.SchDoc|DesignItemId= |SourceLibraryName= |ObjectKind=Sheet Symbol|RevisionGUID= |ItemGUID= |VaultGUID= 
+Record=SheetSymbol|SourceDocument=QMKMouse.SchDoc|Designator=SCW|SchDesignator=SCW|FileName=ScrollWheel.SchDoc|SheetNumber=9|SymbolType=Normal|RawFileName=ScrollWheel.SchDoc|DesignItemId= |SourceLibraryName= |ObjectKind=Sheet Symbol|RevisionGUID= |ItemGUID= |VaultGUID= 
+Record=SheetSymbol|SourceDocument=QMKMouse.SchDoc|Designator=USB|SchDesignator=USB|FileName=Connectors.SchDoc|SheetNumber=3|SymbolType=Normal|RawFileName=Connectors.SchDoc|DesignItemId= |SourceLibraryName= |ObjectKind=Sheet Symbol|RevisionGUID= |ItemGUID= |VaultGUID=