Created Part 5: Amplifier, Cables and Conclusion (markdown)

Part-5:-Amplifier,-Cables-and-Conclusion.md

@@ -0,0 +1,60 @@
+# Amplifier, Cables and Conclusion
+
+In this section, you will assemble the Cables of the official Ploopy Headphones Kit, and complete the assembly.
+
+## Step 1: Prepare to assemble the Amplifier
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8CK7Hz645OfiH1K8Mf0zybS9IuiWHueIcsUtLnYAAQkn2qKw8eF-LQPaXzHOCWD5dGGJx7i-o3XvriMl8GA4WuC8wP9hM7ys1e7QsQ6MJ1GguBzkqRaXQ-3oRZiGHcO2WuIwIHb-WMRgvihPVoT4O-V=w1434-h955-no?authuser=0)
+You will need the following:
+
+- Amplifier PCB
+- Amplifier Case Top
+- Amplifier Case Bottom
+- 2 Small Screws
+
+## Step 2: Place the Amplifier PCB into the Amplifier Case Bottom
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8B8t4TAn3mtP8Gdy1-sgzdmRx1KwWLLI9eUU2namoHEQzMG4Vu3P-1dIDiV0-FnfqG5r0tzLYcEPhnPZD2z2LiI6efDYq2DTI17r81kRbTYw8HSeMlvvRDpAFQ7GVeVT1KiCMrL9b8HYuLsyUUlAYXq=w1434-h955-no?authuser=0)
+## Step 3: Screw the Amplifier Case Top to the Amplifier Case Bottom
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8B9C7xIvg51VEnnyiPL4mXpzjejteQn7Rbka6ZpcWHCIwTORLrO7YgE5_4NgIOS1ekCqAxPHFekYuK-QEMuW7ElFWqzc-J1ayW9Eferhs3kvaRjxk71EKXoitbsELBfSVu9NqoVAdA3v1m8bTNw8T2J=w1434-h955-no?authuser=0)
+- Use both of the two small screws.
+
+## Step 4: Cut out the Ploopy Logos
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8AnzOp6WU6m1FADc5y7YFTYBXJWFDHKSC4zu92OtM2I7QV6GAbW-M_dB9sa1-gMl3xZncfuORrMsd3btWFZKCrsuQ4DyTdw5IhgVInwMlgbbFw_taQh-cN2ubBZBIDeg12mFNlDb9uYFj3Iy9QbZPGA=w1434-h955-no?authuser=0)
+- **(!)** Use scissors to cut the Ploopy Logos out of the cork backing.
+- Be careful, as the cork can easily crack or fall apart. Try to avoid bending the cork unnecessarily.
+
+## Step 5: Peel and stick the Ploopy Logos
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8BTJW49okLmYlTSxrIYlZF4MYL2AyQ2OYATbGL-Gt4ADN93eSWcjMU0Dr8uG6PVFM2aKR2StS-Df_2WWkGN9XXEv8Dnhaf12jHhwMZXTj-iwa42A5eB8OiPjCgEgVp7DFAWytSl7ftdNIELgN-DHEbV=w1434-h955-no?authuser=0)
+- You may need to use tweezers to peel off the packing.
+- Stick the Logos onto the Drivers, as well as onto the Amplifier.
+- Feel free to stick them anywhere else, too, or just throw them in the garbage if you don't want them. They're not strictly necessary...but they sure look nice!
+
+## Step 6: Prepare to assemble the Cable
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8Ag2Ikkt4Lm5rlEddzb4hpBEWbR_LaLeof9vyTDFu9f-1gpRr0SQa6x2IVs_2H232vEsr2A5053KE0wI9K-futvbl_b0PBqJKVvBWgJxF406rw7qvAOm-z9PsoRTt10pJvXbw1syo57fC0TNpmi2tpk=w1434-h955-no?authuser=0)
+You will need the following:
+
+- Cable Y-Splitter
+- 2 TRS Cables
+- Wire Wrapper
+
+## Step 7: Assemble the Cable
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8Daw1ZkFDH7USgkzjaBl5rKaqgKaGHLPgRLlUiPy7mZQM2Yo_8xKza3Ica66xzPlhBSEk3LpX4ysWGoRapsb1EZPtWWdQt2moi9m-vi4b7CCaDEUtJh6LQPjBQ_ncXPBJmYX7x8PxYc2NHf77_9ERpc=w1434-h955-no?authuser=0)
+- It doesn't matter which TRS Cable goes into which jack of the Cable Y-Splitter.
+- Braid the two TRS Cables into a braid. This is good practice to reduce the effects of electromagnetic interference, and it helps keep the wires tidy.
+- Use the Wire Wrapper to hold the wires in place. The location of the Wire Wrapper can be adjusted later.
+
+## Step 8: Admire your handiwork
+
+![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8DdlwDEUUCyUFs_plq2H8VhOonlE7zy1IdAMvYBs0CTzgA4p2_TyAUGJ7w2K77BTBh7-ZbEz9S-JF7e7Oh9mdLA6GgBpcrlLOnD8a9osBj_GBed2KWLdEYBIBRHDddAUj7EBJtD05wOcJduQ-ceqBvY=w636-h955-no?authuser=0)
+
+## Step 9: All done!
+
+Congrats, you finished building the Ploopy Headphones!
+
+It's done! Love them, use them, but don't you dare abuse them!