MirrorMirror
/
headphones
mirror of https://github.com/ploopyco/headphones.git
2
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated Part 2: Drivers (markdown)

ploopyco 2023-06-12 10:48:41 -04:00
parent b7685d1142
commit 99d769489d
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Part-2:-Drivers.md

@ -6,7 +6,7 @@ In this section, you will assemble the Drivers of the official Ploopy Headphones
## (!) Step 1: Solder the TRRS connectors to the Driver Flex Boards
![enter image description here](https://lh3.googleusercontent.com/pw/AMWts8BHffKO3Ol3zv6IhtWsRxcioPYc1O5Wcosg60KDo42_UX_WsTbPBz8ealPG6fzwzWPe-IrilesZPZShFDpXacKDpdv2B3nmx_QlRC-tX7vT_4JxfViRgvEmGWhU9My_vjl-Gg-xyXkLv2iwgrmT5wya=w1434-h955-no?authuser=0)
- **(!)** The Driver Flex Boards are mirrored if you flip them. Make sure that you solder one connector in one orientation of the Driver Flex Board, and then solder the connector in the opposite orientation for the other Driver Flex Board. See the photo, as well as the photo in Step 4, for clarification. *This step is very easy to mess up, so DOUBLE-CHECK the orientation of the TRRS connectors before you solder them down.*
- **(!)** The Driver Flex Boards are mirrored if you flip them. Make sure that you solder one connector in one orientation of the Driver Flex Board, and then solder the connector in the opposite orientation for the other Driver Flex Board. See the photo, as well as the photo in Step 3, for clarification. *This step is very easy to mess up, so DOUBLE-CHECK the orientation of the TRRS connectors before you solder them down.*
- There are two little pegs on the underside of the TRRS jack; these will protrude through the bottom of the Driver Flex Boards. Ensure that the TRRS jack sits flush against the Driver Flex Board prior to soldering. You can do this by sitting the Driver Flex Board on something squishy.
## Step 2: Flatten the Driver Flex Board