Installation
============

Requirements
------------

Regardless of your chosen installation method,
the following is required to successfully deploy Funkwhale:

- **A dedicated domain or subdomain**: it is not possible to deploy Funkwhale on a subdirectory of an existing domain.
- **Access to ports 80 and/or 443**: if you cannot serve the Funkwhale web app and API on these ports, federation will not work

.. note::

    Because of the federated nature of Funkwhale,
    **it is strongly recommended not to change the Funkwhale domain after initial deployment**,
    as it is likely to break your installation.

Project architecture
--------------------

The project relies on the following components and services to work:

- A web application server (Python/Django/Gunicorn)
- A PostgreSQL database to store application data
- A redis server to store cache and tasks data
- A celery worker to run asynchronous tasks (such as music import)
- A celery scheduler to run recurrent tasks
- A `ntp-synced clock <https://wiki.debian.org/NTP>`_ to ensure federation is working seamlessly

.. note::

    The synced clock is needed for federation purpose, to assess
    the validity of incoming requests.

Hardware requirements
---------------------

Funkwhale is not especially CPU hungry.
On a dockerized instance with 2 CPUs and a few active users,
the memory footprint is around 500Mb::

   CONTAINER                   MEM USAGE
   funkwhale_api_1             202  MiB
   funkwhale_celerybeat_1      96   MiB
   funkwhale_celeryworker_1    168  MiB
   funkwhale_postgres_1        22   MiB
   funkwhale_redis_1           1    MiB

Some users have reported running Funkwhale on Raspberry Pis with a memory
consumption of less than 350 MiB.

Thus, Funkwhale should run fine on commodity hardware, small hosting boxes and
Raspberry Pi. We lack real-world examples of such deployments, so don't hesitate
do give us your feedback (either positive or negative).

Check out :doc:`../admin/optimization` for advice on how to tune your instance on small
configurations.

Software requirements
---------------------

Software requirements will vary depending of your installation method. For
Docker-based installations, the only requirement will be an Nginx reverse-proxy
that will expose your instance to the outside world.

If you plan to install your Funkwhale instance without Docker, most of the
dependencies should be available in your distribution's repositories.

.. note::

   Funkwhale works only with Python >= 3.5, as we need support for async/await.
   Older versions of Python are not supported.

Available installation methods
-------------------------------

Funkwhale can be installed using one of the following method:

.. warning::

   The All-In-One-Container or Mono-Container installation is deprecated, don't use it for new installations.
   For more information, visit our blog: https://blog.funkwhale.audio/deprecation-all-in-one-container.html

- Quick install, the most straight forward way to get Funkwhale;
- Mono-container Docker installation;
- Multi-container Docker installation;
- Manual Debian and Arch Linux installation;
- `Ansible role <https://dev.funkwhale.audio/funkwhale/ansible/>`_.

Further, Funkwhale packages are available for the following platforms:

- `YunoHost 3 <https://yunohost.org/>`_: https://github.com/YunoHost-Apps/funkwhale_ynh (kindly maintained by `@Jibec <https://github.com/Jibec>`_)
- ArchLinux (as an AUR package): if you'd rather use a package, check out this alternative installation method on ArchLinux: https://wiki.archlinux.org/index.php/Funkwhale (package and wiki kindly maintained by getzee)
- `NixOS <https://github.com/mmai/funkwhale-nixos>`_ (kindly maintained by @mmai)
- `Helm chart <https://gitlab.com/ananace/charts/>`_ to install Funkwhale on Kubernetes (kindly maintained by `@ananace <https://gitlab.com/ananace>`_)
- `HomelabOS <https://homelabos.com/docs/software/funkwhale/>`_

Quick install
^^^^^^^^^^^^^

To install the latest version of Funkwhale on a recent Debian or Ubuntu server, run::

    sudo apt-get update
    sudo apt-get install curl
    sudo sh -c "$(curl -sSL https://get.funkwhale.audio/)"

This installation script will ask you a few questions, install the required dependencies
and set up your instance.

Additional info:

- This script is based on our `Ansible role <https://dev.funkwhale.audio/funkwhale/ansible/>`_.
- By default, the script installs Nginx, PostgreSQL, Redis and Funkwhale itself but you can customize the installation procedure if you already have some of these services available on your machine
- Edit your pod configuration in ``/srv/funkwhale/ansible/playbook.yml`` and apply new configuration with ``sudo /srv/funkwhale/ansible/reconfigure``
- Upgrade is done using ``sh -c "$(curl -sSL https://get.funkwhale.audio/upgrade.sh)"``.


Alternative installation methods
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

.. toctree::
   :maxdepth: 1

   debian
   docker
   non_amd64_architectures

Running Funkwhale on the develop branch
---------------------------------------

Traditional deployments are done using tagged releases. However, you
may want to benefit from the latest changes available, or to help detect
bugs before they are included in actual releases.

To do that, you'll need to run your instance on the develop branch,
which contains all the unreleased changes and features of the next version.

Please take into account that the develop branch
may be unstable and will contain bugs that may affect the well-being of your
instance. If you are comfortable with that, you need to backup at least your database
before pulling the latest changes from the develop branch.

Otherwise, the deployment process is similar to deploying with releases.
You simply need to use ``export FUNKWHALE_VERSION=develop``
in the installation and upgrade process instead of a real version number,
as we build artifacts on the development branch the same way we do for releases.

It's also recommended to check out the `develop release notes <https://dev.funkwhale.audio/funkwhale/funkwhale/blob/develop/changes/notes.rst>`_ before upgrading,
since you may have to apply manual actions for your instance to continue to work. Such actions are labelled with ``[manual action required]`` in the releases notes.

.. _frontend-setup:

Serving only the frontend
-------------------------

.. note::

    You do not need to do this if you are deploying using Docker,
    as frontend files are already included in the docker image.

    You also do not need to do this if you are deploying manually on Debian or Arch,
    as this is covered by the corresponding documentation already.


Files for the web frontend are purely static and can simply be downloaded, unzipped and served from any webserver:

.. code-block:: shell

    cd /srv/funkwhale
    curl -L -o front.zip "https://dev.funkwhale.audio/funkwhale/funkwhale/builds/artifacts/|version|/download?job=build_front"
    unzip front.zip

.. _reverse-proxy-setup:

Reverse proxy configuration
---------------------------

In order to make Funkwhale accessible from outside your server
and to play nicely with other applications on your machine,
you should configure a reverse proxy.

We offer sample configurations for Nginx, Apache2 and Caddy.

.. note::

    You can freely adapt the proposed configuration to your own needs,
    as we cannot cover every use case with a single template,
    especially when it's related to SSL configuration.

Nginx
^^^^^

Ensure you have a recent version of nginx on your server.
On a Debian-based system use apt:

.. code-block:: shell

    sudo apt-get update
    sudo apt-get install nginx

On Arch Linux and its derivatives:

.. code-block:: shell

    sudo pacman -S nginx

To avoid configuration errors at this level,
we will generate an nginx configuration using your .env file.
This will ensure your reverse-proxy configuration
always matches the application configuration
and makes upgrade/maintenance easier.

.. note::
    The following commands need to be run as superuser.

On docker deployments, run the following commands:

.. code-block:: shell

    export FUNKWHALE_VERSION="|version|"

    # download the needed files
    curl -L -o /etc/nginx/funkwhale_proxy.conf "https://dev.funkwhale.audio/funkwhale/funkwhale/raw/$FUNKWHALE_VERSION/deploy/funkwhale_proxy.conf"
    curl -L -o /etc/nginx/sites-available/funkwhale.template "https://dev.funkwhale.audio/funkwhale/funkwhale/raw/$FUNKWHALE_VERSION/deploy/docker.proxy.template"

.. code-block:: shell

    # create a final nginx configuration using the template based on your environment
    set -a && source /srv/funkwhale/.env && set +a
    envsubst "`env | awk -F = '{printf \" $%s\", $$1}'`" \
        < /etc/nginx/sites-available/funkwhale.template \
        > /etc/nginx/sites-available/funkwhale.conf

    ln -s /etc/nginx/sites-available/funkwhale.conf /etc/nginx/sites-enabled/

On non-docker deployments, run the following commands:

.. parsed-literal::

    export FUNKWHALE_VERSION="|version|"

    # download the needed files
    curl -L -o /etc/nginx/funkwhale_proxy.conf "https://dev.funkwhale.audio/funkwhale/funkwhale/raw/|version|/deploy/funkwhale_proxy.conf"
    curl -L -o /etc/nginx/sites-available/funkwhale.template "https://dev.funkwhale.audio/funkwhale/funkwhale/raw/|version|/deploy/nginx.template"

.. code-block:: shell

    # create a final nginx configuration using the template based on your environment
    set -a && source /srv/funkwhale/config/.env && set +a
    envsubst "`env | awk -F = '{printf \" $%s\", $$1}'`" \
        < /etc/nginx/sites-available/funkwhale.template \
        > /etc/nginx/sites-available/funkwhale.conf

    ln -s /etc/nginx/sites-available/funkwhale.conf /etc/nginx/sites-enabled/

.. note::

    The resulting file should not contain any variables such as ``${FUNKWHALE_HOSTNAME}``.
    You can check that using this command::

        grep '${' /etc/nginx/sites-available/funkwhale.conf

Finally, enable the resulting configuration:

.. code-block:: bash

    ln -s /etc/nginx/sites-available/funkwhale.conf /etc/nginx/sites-enabled/

.. warning::

    If you plan to use in-place import, ensure the alias value
    in the ``_protected/music`` location matches your MUSIC_DIRECTORY_SERVE_PATH
    env var.

Finally, check that the configuration is valid with ``nginx -t`` then reload your nginx server with ``sudo systemctl reload nginx``.

.. note::
    Music (and other static) files are never served by the app itself, but by the reverse
    proxy. This is needed because a webserver is way more efficient at serving
    files than a Python process.

    However, we do want to ensure users have the right to access music files, and
    it can't be done at the proxy's level. To tackle this issue, `we use
    nginx's internal directive <http://nginx.org/en/docs/http/ngx_http_core_module.html#internal>`_.

    When the API receives a request on its music serving endpoint, it will check
    that the user making the request can access the file. Then, it will return an empty
    response with a ``X-Accel-Redirect`` header. This header will contain the path
    to the file to serve to the user, and will be picked by nginx, but never sent
    back to the client.

    Using this technique, we can ensure music files are covered by the authentication
    and permission policy of your instance, while remaining as performant
    as possible.

Apache2
^^^^^^^

.. note::

    These instructions are for Debian only.
    For Arch Linux please refer to the `Arch Linux wiki <https://wiki.archlinux.org/index.php/Apache>`_.

Ensure you have a recent version of Apache2 installed on your server.
You'll also need the following dependencies::

   sudo apt-get install libapache2-mod-xsendfile

Add the following to your ``.env`` file::

    REVERSE_PROXY_TYPE=apache2

Then restart Funkwhale.
This is needed to ensure Funkwhale provides proper headers for media file serving.

Then, download our sample virtualhost file:

.. parsed-literal::

    curl -L -o /etc/apache2/sites-available/funkwhale.conf "https://dev.funkwhale.audio/funkwhale/funkwhale/raw/|version|/deploy/apache.conf"
    ln -s /etc/apache2/sites-available/funkwhale.conf /etc/apache2/sites-enabled/

Tweak the configuration file according to your setup,
especially the TLS configuration.
Otherwise, defaults should work if you followed the installation guide.

Check the configuration with ``apache2ctl configtest``
and once you're done,
load the new configuration with ``service apache2 restart``.

Caddy
^^^^^

We currently do not support a Caddy-only setup, but you can
`help develop it <https://dev.funkwhale.audio/funkwhale/funkwhale/-/merge_requests/1384>`_!

To employ Caddy as a reverse proxy in front of your docker containers
(either mono- or multi-container setup),
use the following Caddyfile configuration:

Caddy v2::

    yourdomain.funkwhale

    reverse_proxy 127.0.0.1:5000

Caddy v1::

    yourdomain.funkwhale {
        proxy / 127.0.0.1:5000 {
            transparent
            websocket
            header_upstream X-Forwarded-Host {host}:{server_port}
        }
    }

HTTPS configuration
^^^^^^^^^^^^^^^^^^^

After configuring the reverse proxy,
you need a SSL certificate to enable HTTPS on your server
(unless you use Caddy, which handles them automatically).

The default reverse proxy configuration assumes you have those available at ``/etc/letsencrypt/live/${FUNKWHALE_HOSTNAME}/``, which
is the path used by `certbot <https://certbot.eff.org/docs/>`_ when generating certificates with Let's Encrypt.

If you already have a certificate you would like to use, simply update the reverse proxy configuration
and replace the following values with the proper paths:
- For nginx: ``ssl_certificate`` and ``ssl_certificate_key``;
- For Apache2: ``SSLCertificateFile`` and ``SSLCertificateKeyFile``.

If you don't have one, comment or remove the lines starting with ``ssl_certificate`` and ``ssl_certificate_key`` for nginx, and ``SSLCertificateFile`` and ``SSLCertificateKeyFile`` for Apache2. You can then proceed to generate
a certificate, as shown below. These instructions are provided by `certbot <https://certbot.eff.org/instructions>`:

.. code-block:: shell

    # install certbot
    sudo snap install core; sudo snap refresh core
    sudo snap install --classic certbot
    sudo ln -s /snap/bin/certbot /usr/bin/certbot

    # if you are using nginx: generate the certificate
    sudo certbot --nginx -d yourfunkwhale.domain

    # if you are using Apache2: generate the certificate
    sudo certbot --apache -d yourfunkwhale.domain

This creates a valid certificate and edit the nginx or Apache2 configuration to use the new certificate. The certificate will be automatically renewed when they expire.
