diff --git a/3.-Enclosure-assembly.md b/3.-Enclosure-assembly.md
index 6da1671..1626379 100644
--- a/3.-Enclosure-assembly.md
+++ b/3.-Enclosure-assembly.md
@@ -26,7 +26,7 @@ If you don't the capability to print the 3D-printed parts, then it's no big deal
 **TODO PIX**
 
 - 2x M3x12mm flat-countersunk machine screws **TODO is this right??**
-- 4x M3x8mm socket cap machine screws **TODO is this right??**
+- 4x M3x6mm socket cap machine screws **TODO is this right??**
 - 6x M3 heat-set threaded inserts **TODO more detail needed for these**
 - 3x roller bearings **TODO more detail needed for these**
 - 2x metal dowels **TODO more detail needed for these**
@@ -75,7 +75,7 @@ Take your time and go slowly. A soldering iron temperature of 350C or 620F is ho
 - Base
 - Primary buttons
 - Secondary buttons
-- 2x M3x8mm socket cap screws **TODO is this right??**
+- 2x M3x6mm screws
 
 ## Step 10: Place electronics assembly onto base
 **TODO PIX**
@@ -85,13 +85,9 @@ The electronics assembly is seated on the base, but it does not attach. It will
 ## Step 11: Screw secondary buttons into base
 **TODO PIX**
 
-**TODO which screw here?**
-
 ## Step 12: Screw primary buttons into base
 **TODO PIX**
 
-**TODO which screw here?**
-
 ## Step 13: Preparing the top
 **TODO PIX**