Updated 3. Enclosure assembly (markdown)

3.-Enclosure-assembly.md

@@ -1,12 +1,16 @@
 **TODO PIX completed enclosure; underside and topside showing shit inside**
 
+In this section, we'll go over how to assemble the two halves of the main enclosure.
+
 ## Step 1: Get the necessary tools
 **TODO PIX**
+
 - A soldering iron
 - 2.5mm Allen key or screwdriver
 
 ## Step 2: 3D-printed parts
 **TODO PIX**
+
 - Base
 - Primary buttons
 - Secondary buttons
@@ -20,13 +24,15 @@ If you don't the capability to print the 3D-printed parts, then it's no big deal
 
 ## Step 3: Hardware
 **TODO PIX**
-- 6x M3 screws **TODO is this right??**
-- 6x heat-set threaded inserts
-- 3x roller bearings
-- 2x metal dowels
-- 1x silicone ring
 
-**If you don't have the hardware, see [[Appendix D: Hardware]] for information on how to get them.**
+- 2x M3x12mm flat-countersunk machine screws **TODO is this right??**
+- 4x M3x8mm socket cap machine screws **TODO is this right??**
+- 6x M3 heat-set threaded inserts **TODO more detail needed for these**
+- 3x roller bearings **TODO more detail needed for these**
+- 2x metal dowels **TODO more detail needed for these**
+- 1x silicone ring **TODO more detail needed for these**
+
+If you don't have the hardware, be not afraid. **We sell hardware kits**, and we also have a few tips on how to order these parts. See [[Appendix D: Hardware]] for information.
 
 ## Step 4: Preparing the scroll wheel holder
 **TODO PIX**