Updated 3. Enclosure assembly (markdown)

3.-Enclosure-assembly.md

@@ -25,12 +25,11 @@ If you don't the capability to print the 3D-printed parts, then it's no big deal
 ## Step 3: Hardware
 **TODO PIX**
 
-- 2x M3x12mm flat-countersunk machine screws **TODO is this right??**
-- 4x M3x6mm socket cap machine screws **TODO is this right??**
-- 6x M3 heat-set threaded inserts **TODO more detail needed for these**
-- 3x roller bearings **TODO more detail needed for these**
-- 2x metal dowels **TODO more detail needed for these**
-- 1x silicone ring **TODO more detail needed for these**
+- 2x M3x6mm socket cap machine screws
+- 6x heat-set threaded inserts
+- 3x roller bearings
+- 2x metal dowels
+- 1x silicone ring
 
 If you don't have the hardware, be not afraid. **We sell hardware kits**, and we also have a few tips on how to order these parts. See [[Appendix D: Hardware]] for information.
 
@@ -76,7 +75,7 @@ Take your time and go slowly. A soldering iron temperature of 350C or 620F is ho
 - Base
 - Primary buttons
 - Secondary buttons
-- 2x M3x6mm screws
+- 2x M3x6mm socket cap machine screws
 
 ## Step 10: Place electronics assembly onto base
 **TODO PIX**