Updated Home (markdown)

1.-Introduction.md

@@ -0,0 +1,46 @@
+** TODO PIX completed mouse**
+
+## Step 1: Get the necessary tools
+**TODO PIX of all tools required**
+- 2.5mm Allen key or screwdriver
+- A soldering iron
+- Solder
+
+## Step 2: Get the necessary printed circuit boards
+**TODO pix of both PCBs**
+- Base PCB
+- Vertical PCB
+
+If you're not sure how to get these PCBs, we sell them! See `Appendix A: Printed Circuit Boards` for more information on how to buy them from us. (We also have a few tips for you, if you want to make your own!)
+
+## Step 3: Get the necessary 3D-printed parts
+**TODO pix of all 3D-printed parts**
+- PCB anchor
+- PCB assembly jig
+- Base
+- Primary buttons
+- Secondary buttons
+- Scroll wheel
+- Scroll wheel holder
+- Scroll wheel holder holder (holder holder holder holder...)
+- 3x roller bearing dowels
+- Top
+
+If you're not sure how to get these parts, we sell them! See `Appendix B: 3D-Printed Parts` for more information on how to buy them from us. (We also have a few tips for you, if you want to make your own!)
+
+## Step 4: Get the necessary electronics components
+**TODO pix of all electrical components**
+**TODO electrical BOM here**
+
+Yup, you guessed it, we sell complete components kits. See Step 2 of `Appendix A: Printed Circuit Boards` if you want more information (or info on how to buy them from your favourite electronics provider).
+
+## Step 5: Get the necessary fastening hardware
+**TODO pix of all fastening hardware**
+- 2x M3x12mm flat-countersunk machine screw
+- 4x M3x8mm socket cap machine screw
+- 6x M3 heat-set threaded insert
+
+No surprise, we sell these too. See `Appendix D: Hardware` for how to buy them from us (or how to get them yourself, if you want.)
+
+## Step 6: Let's get going.
+If you're ready, proceed to `2: Electronics Assembly`. What's the use in waiting?

Home.md

@@ -1,3 +0,0 @@
-# This is a placeholder.
-
-That is all.