George Bryant c5c025ff16 Add BTU mod for the REVC top (#22) ... * Remove V3 and V4 bearing tops based on REVA top - The ball used in newer Ploopy trackballs doesn't fit in the REVA top - it's just slightly too big. - I've designed an updated BTU mod for the REVC top, which should work fine with the older ball. * Move README images to img/ subfolder * Add blank REVC STEP and STL files - These are the official Ploopy Top REVC, edited to remove the bearing sockets. - The idea is that these can be used for any future mods to use different bearings. * Add REVC versions of the BTU top STEP and STL files * Rename v4 BTU mod FreeCAD file to match naming scheme * Remove FreeCAD file for v4 BTU top - It's not really relevant any more as it only works for the smaller ball * Add REVC BTU top mod to the README - Also explains that the v3 and v4 ones can still be found in the commit history		2021-07-29 09:56:59 -04:00
..
Electronics	updated schematic for r1.005 base board	2020-10-15 18:07:08 -04:00
Mechanicals	added kit bearing press stls and steps to repo	2021-02-22 10:54:58 -05:00
Mechanicals-1815-Ball-Mod	added 1.815' ball mod	2021-07-23 13:04:49 -04:00
Mechanicals-BTU-Mod	Add BTU mod for the REVC top (#22)	2021-07-29 09:56:59 -04:00
LICENSE	added cern and gpl licenses; added firmware	2019-09-06 15:13:28 -04:00