01/project_management/hardware/devices/jetson-nano

Development Setup for Jetson Nano

1. Go through the tutorial here: https://developer.nvidia.com/embedded/learn/get-started-jetson-nano-devkit#intro

2. At the end of that guide, you should have a Jetson running off a power supply or micro USB.

3. Get network connectivity. The Jetson does not have a WiFi module so you will need to plug in ethernet. If you have a laptop, you can share internet access over Ethernet.

   To do this with Mac, do the following:

   a. Plug a cable from the Jetson Ethernet port to your Mac (you can use a Ethernet -> USB converter for your Mac).

   b. Go to General->Sharing, then click the little (i) icon next to "Internet Sharing", and check all the options.

   

   c. Go back to General->Sharing, and turn on "Internet Sharing".

   

   d. Now the Jetson should have connectivity!